The animal has a brown body with black and white legs n face
SOURCE: Bird animation
Right click on it, and select "Save Picture As..."
Leave the file name as is, or change it to anything you want.
SOURCE: how do you clean the animal pens on imangine animal doctor?
you have to go on the overhead map, then go to the terrace, (umbrella on bottom left of screen) then talk to the guy standing there, unfortunately, you have to do it EVERY time the pens are dirty
SOURCE: Changing the HEPA filter on a DC17 Animal
Just took my Dyson in and yes my HEPA needed changing. It's under the right wheel (as you're looking at the machine); you can see it through the "vents" above the wheel. The screw is on the bottom of machine.
You will probably need a Torx (star) 15 screwdriver -- that's what Dyson seems to use everywhere.
SOURCE: My Action Replay doesn't work with ACWW
People had gone to extreme measures to fix this problem, when the answer is right in front of them! :P
Yes, Animal Crossing Wild World v.1.52 does NOT work on Action Replay. However, v.1.1 does. Notice that there are two versions of Animal Crossing. If Animal Crossing (the default one) goes to a black screen, and doesn't load anymore, delete that file, and use the other one where it says v.1.1. The codes does not work, but click "START" anyways. Notice how there aren't anymore black screens. Turn it off, and don't load your game. That's where the easy part comes in. Just replace the old codes, and use the v. 1.52 codes (that you can find at Codejunkies.com). It'll work perfectly fine.
I know it was frustrating for you, because it was for me too. But fortunately, I found the solution, and I'm happy to share this with everyone. Have fun!
Which by the way, I forgot to mention that since the default Animal Crossing WW file has been deleted, and the game ID is different than v.1.1., you must click the star on the bottom left corner, and click on Animal Crossing V.1.1. yourself. It won't load automatically like it did before, but it's no troublesome, I SWEAR!
SOURCE: 1992 150hp merc black max and hydraulics won't work, sounds like a sick animal.
On the bottom of the trim/tilt cylinder there is a big white slotted head screw usually located on the right side. Turn that out about 3 turns. Have someone help you manually lift the engine and while it is up tighten that screw back up and it should stay. From there you can check your trim lines and check the Cylinder for leaks. Also check to make sure that there is no water in the system. Once the engine is all the way up just engage the tilt lock and you will be able to do anything that you need to without fear of the engine bleeding back down.
261 views
Usually answered in minutes!
×