Service manuals electronic components datasheets and equipment schematics...
try this site for the service manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: No tengo treiber para konica
Hello,
Thank you for contacting Fixya.com
Please download the drivers from the bellow mentioned link:
http://www.howtodrivers.com/model532191.html
Good Luck and God Bless.
SOURCE: desbloqueo del codigo m2 en konica minolta bizhub 163
Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.
SOURCE: My Konica Minolta Magicolor does not fully
Update the firmware using the following link:
http://kmbs.konicaminolta.us/productsattachments/manuals/FirmwareUpdaterGuide.pdf
The following manual was read by me. The Troubleshooting section and error message section didn't mention the 256 MB memory ram error.
http://kmbs.konicaminolta.us/productsattachments/manuals/magicolor4650EN_4650DNUserManual.pdf
However, there is supposed to be an 'initalizing' message if the printer is initializing.
Also, there is a 'memory full' error when there are too many fonts on the memory card, but this is not something you mentioned.
If you can't solve the problem with the above, I would consider having the unit serviced by Konica Minolta.
http://kmbs.konicaminolta.us/content/salesservicelocator/findservice/findservice.html?model=magicolor4650&cat=Printers&subcat=magicolor&SsdModelId=1042%26productid%3d1041
877-778-2687 is the number for service information at Konica Minolta for your printer.
Please call 877-778-2687 for service information.
Please call 877-778-2687 for service information.
87 views
Usually answered in minutes!
×