All led blinking ii - Konica Minolta PagePro 1350W Laser Printer

It appears to be a built in 'feature'.

• Newly designed with a capacity range from 0.05 oz to 12 lbs (1 gram to 5.4 kg), the Pro II features a built-in countdown kitchen timer with 3 alarm modes (audible beep, blinking LED, or combined).

The new countdown kitchen timer offers an audible beep, blinking LED, or combined audible and visual alarm for the fast-paced chef. The scale's weighing platform is made of durable glass, and the large screen features a new bright LCD with an improved viewing angle.
The Ozeri Pro II Digital Kitchen Scale also features a 3 minute automatic turn-off that yields enough time to make adjustments to measurements before it automatically turns off to conserve battery life. Ships with 2 AAA batteries included, both a calorie and postage guide, and a user manual. Your satisfaction is guaranteed.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Switch off, remove batt, then replace the bat. You should notice a red LED blink. If that does not blink, you can't do much yourself. Take it in for a proper check by authorized service tech.

carriage home sensor (near ribbon drive assy) may defective

Not a malfunction - just a dead battery. See the manual:
http://www.victorinox.com/medias/sys_master/timepieces_manuals/8800396705822/NightVision_II_ENGLISH.pdf

If you have confirmed that the remote's IR emitters have failed and you are out of the warranty period (1 yr), you have a few choices. You can contact Logitech. They will usually issue a 50% discount on a new remote. Or, you can try to repair the remote yourself using the guidance in this article: http://hubpages.com/hub/HowToFixaLogitechHarmony880Remote

Or, you can have it repaired for $14 (or less if you haggle) from this Ebay seller: http://cgi.ebay.com/We-can-Repair-your-Harmony-880-Remote_W0QQitemZ200437939363QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2eab083ca3

Good luck!

If you look on the USB Dongle. If there is a blinking LED that means the Dongle lost connection with the drums. Hit the Black button and all should be fine.

I've got a Superstack II 3300 24port switch, all leds are on, and led 8 blinks.
I'll let you know if I find a solution.

If it beeps three times then the line space lights blink
1 the batterys are installed incorectly
2 no batterys are installed
3 the batterys are weak or dead

Does this affect the operation of your xc Cube in any other way? If not it doesn't really matter. I had a similar issue with my pc, but it doesn't affect the operation and it doesn't really bother me