Err code on tragger grill - Traeger Industries Grilling

https://fireplacehubs.com/masterbuilt-smoker-error-codes/


This should help you. It has a number to call for more help.

ok, what grill are you trying to start....? make/model?
err indicates an error.... could be anything from a faulty high limit to a bad thermostat...

It may be Temperature Sensor Kyla

Spa Quip Error Codes

• err 1 (H20) : Prime Failed
• err 3: Stuck Button
• err 4 : No Water Sensor
• err 5 : Over temp
• err 6 : Thermal Cut Out Tripped
• err 7 : Stuck Relay
• err 8 : No Temp Data
• 01: Stuck Button
• 02: No Controller Data
• 03: Temp Sensor
• 04: Water Sensor
• 05: Spa Over Temp
• 06: Heater Thermal Cut Out
• 07: Stuck Heater Relay
• 09: Water Prime Failed

Or you could ask them?

https://maax.com/services/contact

..

Sounds like it is the trigger valve

Do you get an error messsage that looks like LEr? If a Traeger can't reach 125 for ten consecutive minutes, it will automatically shut down. Try starting at a higher temperature than "Smoke" if it's cold outside.

So I got a ERR on my treager it end up being the controller thank god had a old one to test it good to know

Remove your grill, inner shield and outer dip plate from the Traeger. Start the Traeger in smoke mode. Observe to see if the blower fan is working. Is the auger turning? Are the pellets dry? Condensation can make the pellets swell and cause plug ups.

It depends on what code you're getting. Contact Traeger support https://www.traegergrills.com/support

turn key to <acc> turn radio will blink err. leave on for at least half hour.err will be replaced by enter code.

The same thing is happening to my model and I called the 18009373883 and there is only a one year warranty on it, so if a year has passed your out of luck. If you have a valid receipt then they will give you directions on how to send it in for repairs. Sorry.