Error c-3E05 machine not run error C-3E05

Please, consider getting a users manual, and trouble shooting guide from https://manuall.co.uk/household-appliances/washing-machines/ignis-washing-machines/. The Error code can be decoded. Machine model will be needed. Continuously running pump would an indication the timing mechanism is not advancing. Sensor problem perhaps.

Brand new? Take it back where it was purchased!!

Search for:
Make Model error code

Frequently Asked Questions

FAQs Troubleshooting CS 6000 6000b 6000t 6000i United States Brother

E6 ERROR

...

try google with model# and the error code

Whirlpool Washing Machine Displaying Fault Code PE The part(s) or condition(s) listed below for the symptom PE - PRESSURE SENSOR ERROR // Water level pressure switch error are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.
per https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Washing-Machine/408-5--/Whirlpool-PE-PRESSURE-SENSOR-ERROR-Water-level-pressure-switch-error
b2kjqj

Check the motor brush they surely are dirt you can also clean the collector where the brushes lays on

NVRAM failure need to get tech to come out reflash copier software or the NVRAM and or board is bad

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

connection error check all your connections from machine to screen, that usually is just a communication error depends what treadmill

call in hotpoint

Unplugged the unit; replugged it. Buying a new machine.