My Fujifilm AX350 has stopped displaying my photos. It still takes photos and when the memory card is inserted into the laptop it will save all the photos onto the laptop but still wont display them on camera. When I press the button to view my pictures and videos it does absolutely nothing. I've only had it a few months and never took insurance or warranty out on it. I've not dropped it or anything so no idea what's happened. I've checked to see if the memory card was locked and it isn't. Also tried taking batteries out for a while but that did nothing too.
Firstly, try to reset all the settings. If it doesn't help, I think the problem is with your memory card. By the way, which program for editing photos do you use? I'm a newbie in photography and all I tried is splash effect. Could you recommend any other options, please? I want to make deep, vivid & beautiful photos.
In the menu Options, you can chose how l;ing a picture will be displayed, 3 seconds, 1,5 seconds, Zoom (Continuous) or OFF.
Please check what your settings are.
Use the menial, page 65 and 67.
link to the manual
Is the display blank only after taking pictures, or blank all the time (i.e., can you see the menus)? If you can see the menus, try performing a Reset All (page 67 in the manual). The idea here is to set the contrast/backlighting to factory presets.
The manual can be found here.
If the display is blank all the time, try holding it near a bright light and look at it from different angles to see if you can see any image on the display (if the backlight isn't working, you may be still able to see items on the display). If that's the case, you may be able to navigate to the menus and perform a Reset All.
Otherwise, pull the batteries out and leave them out for a longer period of time - several days, if possible. This should also reset the camera.
Failing this, you will likley need to send it in for repair.
SOURCE: dropped camera in pool
Open camera and place in a bag of rice for a couple of days to absorb moisture.It's worked before on cell phones.
SOURCE: screen reading memory card not initialized
I bought a new memory card for my finepix A330 camera When I turned on the camera after putting in the new card, the screen read "card not initialized" and won't take photos.my son is going holidays 13/9/08 could you help me please Alex Richardson
SOURCE: My memory card on my camera say it is protected
you look on the memory card, there will be a lock slider thing,it might be on lock , check it,
SOURCE: can't access photos
Insert the card...go into the menu and scroll to "copy". Follow the directions for copying the internal memory to the memory card.
Testimonial: "life saver! cheers mate! great help! x"
SOURCE: every time i take a picture on my camera it says
Try this...go into the menu and scroll to "reset"...follow the on-screen instructions. Then, without a card in the camera, go into the menu and scroll to "format"...follow the on-screen instructions. Then if the pics on your memory card are safely on your computer (use a card reader to do this if necessary) insert the card into the camera, go into the menu and scroll to "format" and follow the on-screen instructions. After all this, you should be ok.
131 views
Usually answered in minutes!
×