Light Voltage I am Wondering what the Voltage is of these LED lights

Question edited for full make and model.

It depends on the type of bulb, Incandescent, Compact Fluorescent, Halogen or LED? LED are the ones that give the most issues because they are low voltage and contain their own voltage regulating circuit and will only work on a stable voltage..

Some help in the link

https://www.google.com/search?q=slinger+Ceiling+fan+light+will+not+dim

..

Hi,
Back light led driver or the led array is faulty. check and confirm the voltage to the led back light from the power supply. normally 35V to 100V according to the brand and model of the tv. Check the voltage if the voltage is somewhere around the above mentioned voltage the then the tv have problem with the led array behind the screen . If the voltage is missing then the led driver is faulty. Normally the led drivers is found integrated to the power supply board. If so then you have to replace the power supply board as a whole.
www.electro-medical.blogspot.com

First ~ used deduction, the light is generally don't may not have voltage on the LED's are negative, if is red light blue light general voltage between 3.2 to 3.6 is 1.8 to 2.2 if the voltage is not normal bright LED that is open or damaged
if you want change one please led light

Whenyou connect the power adapter into the laptop, does the power LED lightup? If not then -The battery adapter or the adapter's power lead or the laptop's powersocket could be faulty.Check power adapter's DCplug that connects into the laptop power socket with a multi-meter, the voltageshould be slightly higher than the voltage that is printed on the label on thebottom of the adapter. If the voltage is zero or way below the voltage that isprinted on the label then the power adapter is faulty and needs to be replaced.If the adapter is OK thenconnect it to the laptop and power it up, then look at the power/batterycharging LED light and wriggle the power plug in the laptop's power socket.If the power/battery LED light flashes and in a certain position this LED lightstays firm, then the power socket is either faulty or it has a dry solder jointwhere it is connected to the motherboard.This can be repaired but itrequires the laptop to be completely dismantled to get at this power socket andrepair. If you cannot DIY then I suggest you get a quote first.

Due to the solid state design of LED lighting, there are some important features that will be very useful especially when it comes to outdoor, landscape LED lighting. Safety of 12V LED lights. First distinguishing feature is safety. As compared to incandescent landscape lighting, low voltage LED lights are much more energy efficient and because of that, they are more fireproof. In other words, with lesser energy flow, the chances of fire getting started due to malfunction, overheating, or similar circumstance is relatively lower. Also, the electric short can not cause as much damage as with the 110V voltage lights. As opposed to halogen lights, there is hardly a fear of explosion of the LED light bulb upon overheating or other malfunction. Finally, LED lights are cold to the touch, adding to passers by safety.

The LED- Light emitting diodes- use very little current and voltage to light up and so when you changed from the normal incandescent type +12 , these require only a fraction of the votlage. NOW what seems to HAPPEN is that the return voltage from the switch has RESIDUAL voltage which makes the LED light up, this can be a fraction of a volt and can be a LEAK from the switches, park, brake or otherwise.
Check the wiring once again , check the ground once again and isolate the switches to confirm the LEAK. You can also use a resistor to reduce the voltage if needed which can cut off the light when switch is off.

Whenyou connect the power adapter into the laptop, does the power LED light up? Ifnot then - The battery adapter or the adapter's power lead or the laptop's powersocket could be faulty. Check power adapter's DCplug that connects into the laptop power socket with a multi-meter, the voltageshould be slightly higher than the voltage that is printed on the label on thebottom of the adapter. If the voltage is zero or way below the voltage that isprinted on the label then the power adapter is faulty and needs to be replaced. If the adapter is OK thenconnect it to the laptop and power it up, then look at the power/batterycharging LED light and wriggle the power plug in the laptop's powersocket. If the power/battery LED light flashes and in a certain position thisLED light stays firm, then the power socket is either faulty or it has a drysolder joint where it is connected to the motherboard. This can be repaired but itrequires the laptop to be completely dismantled to get at this power socket andrepair. If you cannot DIY then I suggest you get a quote first.

Good Day;
Make sure when measuring voltages that your'e on the proper ground, all TV's this day has two grounds. The HIT has #'s near the components, LED's that light or do not light. YES, get info to trouble shoot further.
Good Luck, big IRISH.

Good Day;
Make sure when measuring voltages that your'e on the proper ground, all TV's this day has two grounds. The HIT has #'s near the components, LED's that light or do not light. YES, get info to trouble shoot further.
Good Luck, big IRISH.