Analog on digital watch not working - Watches

Your earlier question gives the watch model.

The internet search using Google turned up the following discussion, particularly about the use of two batteries.
Unsure of how to resolve the problem, but it may be at the root when a battery is dead or newly replaced.

http://forums.watchuseek.com/f296/ohsen-digital-analog-hybrid-watch-only-digital-working-4625501.html


Thread OHSEN Digital Analog hybrid watch Only digital working

1. did you check the battery? some analog-digital watches have two batteries. one for analog and the other for digital.
if so, try to replace one of the battery.

2. maybe your watch need to clean the internal mechanism. bring it to service center.

That certainly wouldn't hurt - be sure you use good new batteries.

Shortcut battery with AC contact. AC can be found on the sides of watch movement(very tiny). You have to use pointed tweezers: one end on battery+, another on AC contact for three secs.

There are two batteries in the watch. One for the digital watch and the other for the analog watch. The battery for the analog side probably needs changing but when the back is opened, you might as well change both batteries.

Watch has two batteries, one for digital and one for analog.
Analog battery is dead.

mcdevito75 here, Chances are the analog dial is part of the chronogragh section, maybe the stop watch.

A lot of times they hide a second battery for the analog display under the larger battery used to run the digital display. Also, the 2025 may not have a full charge.

FIXED!!!

As it turned out these Mossimo ANA/DIGI watches use two different batteries, one for the digital part (big) and other for the analog mechanism (small).

Have the watch serviced to change the second battery and VOILA!!!!

Enjoy!
Mivales.
Made in Costa Rica!!