Question about Konica Minolta Laser, Toner, BizHub Pro c5501, c6501 - Cyan - 25,000 Page YieldCyan - 25,000 Page Yield
Replace the black developer and or the black developer and black developer unit
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Posted on Mar 10, 2018
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
SOURCE: konica minolta bizhub 350
• The Fusing Roller Sub Thermistor does not
detect the required temperature within 30 sec.
after a warm-up cycle has begun; therefore, the
copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period
of time has elapsed during a warm-up cycle.
1
Check that the H1[ fuser lamp] comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
2
Check that the H2 comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
3
Check the installation of the TH1 and the TH2, and
correct or clean as necessary.
- -
4
Check the operation of the TH1.
Remove CN80 (4P), and then check that the resistance
across CN80-2 and -3 on the Thermistor is
infinity.
- -
5
Check the operation of the TH2.
Remove CN81 (4P), and then check that the resistance
across CN81-2 and -3 on the Thermistor is
infinity.
- -
6
Check the continuity of the H1.
Correct or replace as necessary.
- -
7
Check the continuity of the H2.
Correct or replace as necessary.
- -
8 Change PU1 - -
9 Change PWB-A
Posted on Nov 19, 2007
SOURCE: what does code 2454 mean on the konica minolta
Developing motor for the Black, working in conjunction with Toner Control Sensor.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Posted on Jul 31, 2009
SOURCE: IError Code C13FO on konica minolta Di1610
C13F0 - Laser error
The laser output exceeds the upper limit value.
The laser output remains lower than the lower limit value.
Posted on Aug 23, 2009
SOURCE: Konica Minolta Magicolor 4690MF gives 0502 error.
machine trouble 0092 service call
This happen after I cleaned the waste box for Konica Minolta Magicolor 1600W
Posted on Mar 08, 2010
Mar 15, 2018 | Konica Minolta Office Equipment & Supplies
Mar 15, 2018 | Konica Minolta Office Equipment & Supplies
Aug 28, 2014 | Konica Minolta C6500 C5500 C6501 C6000...
Apr 14, 2014 | Konica Minolta Laser, Toner, BizHub Pro...
Apr 04, 2014 | Konica Minolta bizhub Office Equipment &...
Feb 19, 2014 | Konica Minolta Office Equipment & Supplies
Jan 20, 2014 | Konica Minolta C6500 C5500 C6501 C6000...
Nov 22, 2013 | Konica Minolta Laser, Toner, BizHub Pro...
Nov 22, 2013 | Konica Minolta Bizhub Pro C6501 Toner...
May 19, 2009 | Konica Minolta bizhub C250 All-In-One...
617 people viewed this question
Usually answered in minutes!
×