Screw size for stand of 42lh40 - LG 42LH40 LCD TV

This depends on the model being hung on the stand. The size screw to use is usually listed in the manual. Also make sure to check the maximum length of the screw or you can damage the TV.

I could not find the screw size. However I found a link to a genuine screw, USD 2.50 per. Confirmed that your model number is in the "Found in Models" dropdown.

TVserviceParts com Samsung 6002 001294 Screw Tapping BH M4 L16 ZPC Black

Take the Stand to the hardware store and have them try a few sizes that fit. You need Machine Screws and who knows what length?

I called Toshiba for this TV model "40RV525R" and they said the pedestal stand for the t.v. to stand on was an m5, product # 75012791, and the length was approx 20-25 mm

Hello,

There are different types of stands as well as the screws vary. It is by the exact type of stand we can provide a screw size.

Another solution is for you to try to reach the dealer that supplied the TV stand to you, so as to get the exact screws that came with the stand.

Take care and good luck

It straight forward check for all around the base stand for screws,just make sure u check and take out all the screws out.Now,just push the base stand it foward or backward for loosen.Just take it out now.

am not sure on size service manual doesnt say but there 2 1/2 long.

Is that a problem? Check the hole size and choose a screw with a head that is bigger than the hole size. Typically select a minimum of 4mm diameter screw.

You are correct. Polaroid does not make the screws available. You will have to obtain locally, per Polaroid.