My canon pixma mx 452 is not printing straight lines.the words have zig zags also

SOURCE: mutiple lines on right side of photo

try removing the ink cartrage and clean the heads in the printer with a quetip and rubbing alcohol. same with the cartrages.

SOURCE: canon pixma mx 300 won't send or receive fax

how do u fix the fax to fax and not go on auto redial

SOURCE: colors print blurred

you need to run the nozzle deep cleaning utility, nozzle check and alignment procedure under the printer properties maintenance tab.
Please rate this solution. Thanks.

SOURCE: i have canon405 machin these are give zig zag line

Do you mean that you have paper that are wrinkled in zig-zag?
If yes, then you have three possible problems:
1) moisture on paper - in cass flip paper, upside down, and then see, if its ok change paper.
2) bad pressure between pressure and fixing roller
3) worn out pressure roller

SOURCE: canon pixma mx 320 error 5800

there are two ways you can remove the error message from your printer..

the first is to reset the printer and the second is to replace the waste ink absorber. If the reset thing did not work for your then you'll be spending money to replace the absorber.

How to reset? follow these steps
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

Hope that solve the waste ink absorber in your printer..