Samsung HL-S5686W 56" HDTV Logo

Related Topics:

Anonymous Posted on Mar 07, 2018

I have a Samsung HL-S5687WX/XAA and the screen is completely white and there is now sound on AV1. If we plug in our WII and go to Netflix on AV3 the picture and sound are fine. The HDMI source gives the message weak or no signal. What could be wrong and how do we correct this?

1 Answer

L Vincent Testa

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Renaissance:

An user who is expert in 3 categories / brands.

  • Samsung Master 724 Answers
  • Posted on Mar 07, 2018
L Vincent Testa
Samsung Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Renaissance:

An user who is expert in 3 categories / brands.

Joined: Jan 19, 2014
Answers
724
Questions
0
Helped
367202
Points
3088

You either have incorrect placed or bad avi cable lastly could be a dmaged main board in the TV since other connections such as hdmi work fine focus on the avi device your connecting and test it o another tv with the current cables i bet it is not the TV

5 Related Answers

A

Anonymous

  • Posted on Feb 09, 2008

SOURCE: no sound or picture HL-R5067w samsung

alread change the lamp and fan did not work

Ad

Anonymous

  • 203 Answers
  • Posted on Nov 28, 2008

SOURCE: samsung green lines....

From past experience only two things can cause this. First is the cable going from the digital board to the DMD board. Make sure you disconnect the power, and use caution disconnecting the plug or tightening it, not to strip the plastic tension screws. Don't use power screwdriver for loosening or tightening this DVI type cable. Second is the digital board itself that can cause green interference lines in picture. For this, you may consider sending the module, which is the large shielded box where the cable screws on to back of set, out for service or rebuild. Reason being it is cheaper than buying replacement digital board. If it is the board itself, start by running a search on it by part number to see who has one. As I recall, the part number should be BP94-02084A, on your model. Good luck, Russmann.

Anonymous

  • 184 Answers
  • Posted on Feb 14, 2009

SOURCE: Samsung DLP HL-S4266W White dot problem

Its the DLP IC chip itself that is bad. The DMD board is where the chip resides but if you order a board, it will come without the chip. Its not cheap and the replacement is tricky because the DMD board must be removed and then an alignment of picture centering will be necessary.

michtech

SOURCE: Samsung HL-S5679W Check no. 3 fan message

Their is no more you can do.
You need a professional.
Stop using the TV until it is repaired.
Call the manufacturer to find you nearest authorized service center.

MR. TV Sales & Service Inc
Milwaukee, Wisconsin 53405
(414) 762-8600
Established 1974

Anonymous

  • 2 Answers
  • Posted on Jun 09, 2009

SOURCE: Tv shuts itself off

Look for the computer processor inside the TV. It needs to be cleaned. A can of compressed air will work. The processor is overheating and causing the tv to shut off. Look for the small fan that is supposed to keep the processor cool then remove the dust.

Good luck!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have the 3 RCA red, yellow, white cables on back of dvd and to tv. Video only plays when I select video 1 under the input. When when I select video 3 only sound and no video. What else can I try?

Sounds like from the symptoms that you have plugged the white and red cables into AV3 input on the back of the Teleivsion and plugged the yellow cable into AV1 on the back of the Television.
Check the cables are all plugged into AV1 input ports on the back of the Television. Red and White go into the Audio inputs and Yellow goes in the video input. Also make sure you have not plugged cables into component inputs on television look for AV1 in on back of Television .
0helpful
1answer

How do i reset av and tv chanel on Samsung Series 4 PS42C430 42

i activate av1,av3 and av3 in service. my tv come on and off. i can't inter in service. samsung 42, PS42C430, SO HELP ME HOW TO DEACTIVE AND INTER IN SERVICE.
1helpful
1answer

Hooked up to a mgnavox tv. selected AV3 to see CD ROM. Cd plays but can't hear sound. Please advise.

Check to make sure the red and white plugs are in the same av3 area as the yellow video plugs. On some TVs it is close together with av1 or 2 and not well marked. Also check the connector at the CD end. Hope that's all it is. Let me know if I can help more if it's not the solution:)
0helpful
2answers

Samsung, DLP TV 50 inches Model # HL-T5075X/XAA

Samsung just told me they wouldn't fix my tv because it was produced in Nov. of '06 and the only ones they would fix were made in August of '06 or earlier. I am way too angry right now to call the service tech number they so very nicely provided.
0helpful
1answer

I have picture but no sound LG flatron TV and Pioneer DVD player.

connect audio output (RCA Jack white n red color) from the video, to the audio input of your TV. Make sure you use same AV channel for the video and audio.
i.e AV1 or AV2 or AV3
2helpful
1answer
0helpful
1answer

1/4 of screen is black (right side)

It is the light tunnel. The tunnel is four small pieces of glass in a aluminum tube the size of tootsie roll. in the center of the light engine.
0helpful
1answer

Have a Sanyo DP42828(42"). My Satellite is working after the card resetting itself. But which 3 holes do I hook the (RED, YELLOW, and WHITE) for the dvd player?

dems,

Are you reffering to your DVD player to be conected to with your TV screen?

For DVD player connection the 3 colored RCA jack socket are:

YELLOW = video out
RED and WHITE = Audio out (left and right channels)

to hook up to your screen, at the back of the screen or side of it you'll see RCA socket indicating "AV1" "AV2" AV3" this are all Audio/video inputs where you can hook up all you A/V device or game consoles. These inputs also have the same 3 colored socket (yello = video red/white = audio)
connect your DVD player to any of this input following the same color code.After connecting the cable, select the input where you hook up your dvd player. Do this by pressing "A/V" buttons in remote commander of your TV. continously press this button until it reaches the exact location where you plug your player ex. AV1, AV2,AV3

note: in some cases the remote commander doesn't indicate this A/V button but a picture of a box having a arrow pointing inside the box.


cheers,
mark

3helpful
1answer

NO AV1 AND 2 VIDEO SIGNAL

tv start working on its own.
386helpful
30answers

Wii gone black and white, no colour

I bought a wii a few days ago and like everybody else mine too was in black and white with a grainy picture. I have a Panasonic lcd flat screen and thought I had connected it corrected, I got somebody out to have a look at it and found out there are some connections on the side of the TV which I hadn't even noticed before, once I put the red white and yellow leads in these and set the TV to AV3 everything is in perfect colour. Hope this works for some of you.
Not finding what you are looking for?

129 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...