G Shock How to set date , time and day

Use the manual to set the correct time zone, time and date. Manual is available on the Casio worldwide website>support>manual>watches.
Have the module number at hand: you will enter it to find the manual. The module number is a 3 digit or 4 digit number on the back of the watch.

You have to set the year, the month and the date. Then you set the time zone. After that you can set the local time. You may also have to set the Daylight Savings Time.
The watch has a built in calendar that may run from let's say January first 2000 to the year 2070 (just a guess). If you set the calendar correctly you do not have to adjust the date when a month has 30 days, or when it is a leap year.

Pressing the ADJUST button for 3 sec digits will start flashing.You have entered to setting procedure.By pressing once at time,the MODE button,go to date adjust (date digits flashing).Set correct date and year (important) in order to have the right day,by pressing the RECEIVING button.Press the ADJUST button again when finished.

Hi! Welcome to FixYa!

To change time and date setting in your G Shock model 2688 330A, please follow the steps I'll provide below:

1. Hold down "A" until the city code flashes while the watch is in timekeeping mode.
2.Press "C" to scroll through the time setting options. You will see "Hour" and "Minutes," among other options.
3.Press "D" when the option you want to change is flashing.
4.Press "D +" to change the hour and minutes.

Hope this helps.

IN THE OUTER PROFILE YOU HAVE FOUR BUTTONS,JUST PRESS THE TIME/DATE BUTTON AND IN THE CENTRE OF THE WATCH YOU FIND THE DAY(EG:SUNDAY)IS BLINKING,JUST PRESS THE OPPOSITE SIDE BUTTONS TO CHANGE THEDATE,AFTER CHANGING DAY,AGAIN PRESS THE DATE/TIME BUTTON NOW APPEARS THE TIME BUTTON(EG:11.00 HRS),NOW PRESS THE OPPOSITE SIDE BUTTON FOR CHANGING ......
THANKING YOU.........GOOD DAY

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all CASIO watch manuals. Rate me, please.

The day of the week will be right after setting the year, month, and date. Adjust with step 2) from timekeeping mode (where time, date, and day can be toggled with button D).

Setting CASIO G-Shock Watch

1) Home City
2) Setting the digital time
3) Adjusting hands
4) Alarm set/on/off
5) Snooze
6) Hourly Chime

A --- B
( ) Button reference
C __ D

1) Select home city first (if equiped):
Press C until regular timekeeping mode is reached. Hold A until seconds flash. Press C to get to city code. Use B and D to move city east or west to your home city. Press A to set and exit.

Press C until timekeeping mode is reached (high beep).

2) Set time, Date, etc:
Hold A until seconds flash. Press C until item to adjust is flashing. Press B or D to adjust. Press C to go to next item. Press B or D to adjust. Press A to exit.

3) Adjust hands (if equiped):
Press C until H-Set is reached. Hold A until time flashes. Press D to advance minute hand. Press B while holding D to set faster and continuously. Press D to stop hands when correct analog time is reached. Press A to exit H-Set mode. Press C to return to timekeeping mode.
In Timekeeping mode B is illumination and D is time/day/date display advance.

4) Alarm set/on/off
Press C until alarm mode is reached (AL1 - AL4 + SNZ and SIG). Press D to select alarm to adjust. Hold A until alarm time flashes. Press B or D to adjust alarm time. Press C to toggle between hour and minutes set. Press A to exit. Press A to turn alarm on and off. Repeat for AL2 - AL4. Press C to return to Timekeeping mode.
To stop any alarm, press any button.

5) Snooze (SNZ):
Press C until alarm mode is reached (AL1 - AL4 + SNZ and SIG). Press D to select snooze alarm (SNZ). Hold A until snooze alarm time flashes. Press B or D to adjust snooze alarm time. Press C to toggle between hour and minutes set. Press A to exit. Press A to turn snooze alarm on and off. Press C to return to Timekeeping mode.

To cancel the next snooze: Press C until the timekeeping screen is reached or go to the Snooze alarm (SNZ) screen.

6) Hourly Chime (SIG):
Press C until alarm mode is reached (AL1 - AL4 + SNZ and SIG).
Press D to select hourly chime (SIG). Press A to toggle chime on and off.

Press C to return to Timekeeping mode.

Good luck,
Techjoel

pull the trigger up and start seting clock just like the regilar system.

Buttons are: A or Adjust (10 o’clock position), B or Time Memo (2 o’clock), C or Mode (8 o’clock), D or Receive (4 o’clock) and L or Light (6 o’clock)
To manually change time, date, year, month and day, hold A until beep and city code appears; press A again until 12H/24H flashes; press C to cycle through options as hour, minutes, year, month, and day flash; use B or D to change flashing option.

cant set time and date