- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As you can see in the picture, it takes some time to charge the watch up 100%. If you are charging the watch indoors, then it will take 126 hours. The best thing to do would be leave it in sunlight for up to 6hours and the charge should come back fine.
I couldn't find your model on thier web site but this range appears to have solar panels to charge the battery. Place your watch in bright sunlight or under a lamp (not a hot one) to charge the battery.
I got last year same problem, easy to resolve :)
I was doigng GC and i got my watch in failur exactly like yours.
Solution?
Buy 4 fresh, alkaline, good brand batteries. Put it in charger unit. Let the watch to charge for 12hours. After do garbage collection again or formatting if you cant do GC.
If you got again fail, charge again it for 12 hours.
I did it for 3 times and...the third days, I got "Done!" and solved :) It happens when battery is not full charged, so do GC just when is very charged. I love my Cyber, but sicne seems that GC collecting drink a lot of energy seems that low level battery doesnt let the inside flash memory to work well when try to format/GC datas.
mcdevito75 here, Press MODE and see display flashing, presss mode until you get to date, then press set, once done press mode again for steady display.
mcdevito75 here, the 2 buttons you need are the MODE and SET buttons, press Mode and see display flashing, now press SET to cahnge any of the settings, Hour, minute etc. press mode after each change, hour, minute etc. When all settings are done, press MODE for steady display.
1) Press "Mode" button until Time is displayed. 2) Press and hold "Lap/RST" button until seconds display starts flashing. 3) Press "ST./STOP" button to change selected entry. 4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format 5) Press "Lap/RST" once you are done to set the time.
To set Alarm time:
1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts
flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM 5) Press "Lap/RST" once you are done to set the alarm.
To toggle alarm sounds on and off:
1) Press "Mode" button until ALM is displayed 2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display) 3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press any button on the watch.
1) Press "Mode" button until Time is displayed.
2)
Press and hold "Lap/RST" button until seconds display starts flashing.
3)
Press "ST./STOP" button to change selected entry.
4) Press "Mode"
button to change from
seconds>minutes>hours>date>month>day of the week>time
format>date format
5) Press "Lap/RST" once you are done to set the
time.
To set Alarm time:
1) Press "Mode" button until ALM
is displayed.
2) Press and hold "Lap/RST" button until minutes display starts
flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to
cycle through for AM or PM
5) Press "Lap/RST" once you are done to
set the alarm.
To toggle alarm sounds on and off:
1) Press
"Mode" button until ALM is displayed
2) Press "ST./STOP" button to
toggle alarm sounds on or off (shown on display)
3) If alarm sound is
shown on display, alarm will go off every day at the selected time. To
turn off alarm once the alarm sounds, simply press "ST./STOP" button on
the
watch.
1) Press "Mode" button until Time is displayed.
2)
Press and hold "Lap/RST" button until seconds display starts flashing.
3)
Press "ST./STOP" button to change selected entry.
4) Press "Mode"
button to change from
seconds>minutes>hours>date>month>day of the week>time
format>date format
5) Press "Lap/RST" once you are done to set the
time.
To set Alarm time:
1) Press "Mode" button until ALM
is displayed.
2) Press and hold "Lap/RST" button until minutes display starts
flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to
cycle through for AM or PM
5) Press "Lap/RST" once you are done to
set the alarm.
To toggle alarm sounds on and off:
1) Press
"Mode" button until ALM is displayed
2) Press "ST./STOP" button to
toggle alarm sounds on or off (shown on display)
3) If alarm sound is
shown on display, alarm will go off every day at the selected time. To
turn off alarm once the alarm sounds, simply press "ST./STOP" button on
the
watch.
Try this procedure (works for most Casios) Make sure that you are viewing the time mode, then press and hold the upper left button on your watch. Then you can adjust the flashing item in the display with the two right hand buttons. To advance the flashing cursor, push the bottom left button. Then when you're done, press the upper left again.
×