Lost code for rca DTA800B1 digital converter box

Bobby, Check the attached links for codes,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://tv.manualsonline.com/manuals/mfg/rca/dta800b1_31.html

http://www.manualsonline.com/support/rca/tv-converter-box/program-codes-for-remote-2945763

http://www.avsforum.com/forum/186-coupon-eligible-converter-box-cecb/1089820-need-help-programming-rca-dta800b1-remote.html

RCA DTA800B1 Digital TV Converter Box

www.ask.com/rca/dta800b1/convert/box/how-to-setup-without-remote/

DirectTV remote model Rc64 will control the RCA model DTA8001B1 digital receiver. Set the remote's switch to unused AV1 or AV2 position, simultaneously press and hold mute and select buttons until indicator gives a double flash and immediately enter code number 00392 after which the indicator will double flash in acceptance. Works menu and it's navigation, channel up and down, and numerical keypad.

Let it be. How're you?

There are a lot of possible RCA TV codes programmed into the DTA800B1 remote.
Try the following three digit codes: RCA 000, 001, 005, 072, 073, 074, 075, 076, 077, 078, 135,
138, 140, 144, 150, 156, 159, 162, 163, 169, 171, 178, 229, 246, 249, 260, 274, 275, 293, 302 in order.

To program the remote. Turn on your TV manually and press PGM (to the left of the zero in the number pad section). The LED should light and stay lit. Type in the first 3 digit code and press OK (in the center of the arrow keys near the top). See if the gray volume up/down keys work to change the volume. If it doesn't work press PGM again and enter the next code.

Note that the converter box remote will only turn on and off, switch the input from Channel 3 or 4 to AV in, adjust the volume and mute the TV. It will not control any of the DVD functions. Your original TV remote will not control the converter box.

The manual for the DTA800B1 is available here: http://www.1800customersupport.com/productdocuments/DTA800B1_RCA.pdf .

I hope this helps.

Cindy Wells
(who has the DTA800A which is the model without the analog pass-through.)

ask t=it from the store that you got it

Find the user guide for your universal remote and use the RCA cable tv/satellite codes, and one should work for your RCA DTA800B1 converter box. My Sharp Aquos remote liked the RCA satellite code.

rca converter box syvania tv codes please thank you robert

sanyo 037,082.083.124.198,268.274 Press program, three number combo, ok, check volume control for function