Canon Service Manual For Ir 5000 Logo

Related Topics:

A
Anonymous Posted on Feb 21, 2013

Ir 5000 good copy only at test print but light copy and lot of black lines in actual copying

Lot of lines downward especially at dark orignal copy

1 Answer

Peter Taylor

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Expert 119 Answers
  • Posted on Feb 03, 2019
Peter Taylor
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Nov 25, 2011
Answers
119
Questions
0
Helped
114038
Points
317

Needs deep cleaning do it twice!

5 Related Answers

Anonymous

  • 26 Answers
  • Posted on May 20, 2007

SOURCE: Black Line printing on copies

Just clean the glass top of the scanner and the slit of glass on the left hand side of the scanner.

Ad
headstrong

Pedro

  • 233 Answers
  • Posted on Jan 10, 2008

SOURCE: Poor quality copies on Canon imageRUNNER 330

the image drum needs to be replaced

thanks for rating

Anonymous

  • 2 Answers
  • Posted on Jan 15, 2008

SOURCE: Wide black line down middle of paper

I have same problem, with new ink cartridge, also tried cleaning the print head, no luck.

Anonymous

  • 71 Answers
  • Posted on Jun 20, 2009

SOURCE: changed black ink cartridge to LD brand. Now

Canon printers do not like non Canon inks. Maybe other printers have similar issues but it seems that Canon is particularly finnicky.

Anonymous

  • 1219 Answers
  • Posted on Jul 02, 2010

SOURCE: canon ir 1600 my copier print copy image is very poor

Hi there,
iR1600 are special machine that needs a little bit more care.

First, clean the laser unit and optics ( beneath copy glass too ). Then use some polisher and polish the developing cylinder and clean/replace developer cylinder blade.

Use GENUINE CANON DRUM UNIT and GENUINE TONER.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why are copies dark at top, light at bottom? - Canon IR 3300 Digital Copier but computerice print is ok good

1. Glass could be dirty, smoggy
2. Lid that is not closing on the one side.
3. Scanner unit faulty.
0helpful
1answer

Why is canon ir 3300 making dark lines on a copies please help

Did U check the drum? How many copies made?Can also be a transfer rolerr,or fixing film in heather
0helpful
4answers
0helpful
2answers

Samsung scx 3200 prints dark but xerox copies are so light that they cant be read

HI PLEASE CLEAN THE CCDUNIT .YOUR PRINTER CCD UNIT IS VERY LOTS OF DEST.AFTER CLEANING CCD THEY PRINT SAMSE SO REPLACE CCD UNIT WITH CABLE
1helpful
1answer

There is a dark vertical line of toner on prints

Common problem. Most likely caused by a bad drum cleaning blade. This is especially true if you run say 10 copies and the last copy out of the machine is worse than the first copy out. Drum cleaning blades are cheap at less than $30.00.
Good Luck and Thank You using Fixya.
0helpful
1answer

Canon IR C5185 printing black copies, would replacing black drum fix the problem?

replace the black charger... if the copies are coming out strongly black with no white lines then your drum is good... the charger died...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

5helpful
2answers

Which one is better to buy IR 5075 or IR 5065

The all above models are same with minor change for speed
You need model as your daily output requirement
All models are heavy duty.
you can select any one for upto 10,000 print or copy per day or for 20,000 & up print/copy select ir 5075
0helpful
1answer

Black lines on the right side of every copy

depending on what the lines look like it could be the charge roller or transfer roller.
A defect on the charge roll appears as black areas on the front of the test page, and as light gray areas on the test page.
A defect on the PC drum of the toner cartridge appears as white areas on a dark, full–coverage test print and as black areas on the "text only" test page.
I have also seen a line with a 'ridge' on the paper. This will appear almost like an embossed line. This was caused by the fuser roller being scored by debris.
0helpful
1answer

Dark edges

It depends... never use a Reman cart in these machines... only use sharp...especially if the machine is under warranty.

Does this happen when,
Using the Doc Feeder
When making copies from the Glass
Or when you print from a computer (assuming you print from a PC)

If you print something and this happens then it is inside the machine
Probably toner or developer dumping...

Take a few pieces of large white paper and cover the entire glass surface... make a copy is the line there? If so see the answer above... if not then close the top and make a copy with no paper on the glass... is that black line there.. If so then your top needs adjustment...

One more test
If you make a copy using the doc feeder, this black line only occurs when making copies with the doc feed, clean the **** glass, and try again...

0helpful
1answer

Canon IR 5000 Printing multiple copies of mutliple copies

Dose it do it when you use it as just a copier? I would have to say that the problem lies with in your network some where. Call your IT person.....
Not finding what you are looking for?

105 views

Ask a Question

Usually answered in minutes!

Top Canon Computers & Internet Experts

old marine
old marine

Level 3 Expert

2426 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a Canon Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...