Lost codes for RCA DTA800B1 converter box

http://tv.manualsonline.com/manuals/mfg/rca/dta800b1_31.html

Bobby, Check the attached links for codes,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://tv.manualsonline.com/manuals/mfg/rca/dta800b1_31.html

http://www.manualsonline.com/support/rca/tv-converter-box/program-codes-for-remote-2945763

http://www.avsforum.com/forum/186-coupon-eligible-converter-box-cecb/1089820-need-help-programming-rca-dta800b1-remote.html

RCA DTA800B1 Digital TV Converter Box

Let it be. How're you?

go to www.remotecodelist.com + memorex.com
God bless you

There are a lot of possible RCA TV codes programmed into the DTA800B1 remote.
Try the following three digit codes: RCA 000, 001, 005, 072, 073, 074, 075, 076, 077, 078, 135,
138, 140, 144, 150, 156, 159, 162, 163, 169, 171, 178, 229, 246, 249, 260, 274, 275, 293, 302 in order.

To program the remote. Turn on your TV manually and press PGM (to the left of the zero in the number pad section). The LED should light and stay lit. Type in the first 3 digit code and press OK (in the center of the arrow keys near the top). See if the gray volume up/down keys work to change the volume. If it doesn't work press PGM again and enter the next code.

Note that the converter box remote will only turn on and off, switch the input from Channel 3 or 4 to AV in, adjust the volume and mute the TV. It will not control any of the DVD functions. Your original TV remote will not control the converter box.

The manual for the DTA800B1 is available here: http://www.1800customersupport.com/productdocuments/DTA800B1_RCA.pdf .

I hope this helps.

Cindy Wells
(who has the DTA800A which is the model without the analog pass-through.)

yes definitely... Universal remotes are specially designed for these purposes... you need to select the proper model number of remote in order to make it work...Model number can be found on the remote itself... As you said that you have lost the remote, you can find the model number of a similar remote from your friends home or google to find out...

Find the user guide for your universal remote and use the RCA cable tv/satellite codes, and one should work for your RCA DTA800B1 converter box. My Sharp Aquos remote liked the RCA satellite code.

I have an RCA DTA800 converter box but I need the codes for my Magnavox...need help