Green power on light flickers

The green blinking light is telling you the error code. count the number of blinks and make note of any sequence. Then google your make and model with blink codes added to the end. This will lead you to sights that will tell you what the error or blink code means.

Unplug for a few should correct!

Are you sure its the right remote? Verify TV mode on remote if equiped with mode switch. Drain the remote by removing batteries.

http://www.jyerdon.com/tv/

If it`s a 65513 mitsu, this will fix the flashing green light, most of the time, e-mail me with any questions, good luck


[email protected]

The green light on the front blinkes and does not stop even after hitting re-set button.

Hi there, I have a Mitsubishi HDTV 1080 and when I tried to turn it on the tv this morning it wouldn't turn on and the power light is flashing green. I pushed in the reset button but it just keeps flashing and still won't turn on.

If the LED doesnt light. Check the fuses. the fuse many be blown. Unplug the set before you check the fuse.

Check C81A2, C81A3, C81B3 and C81B4 (1000 uFD, 16V, 105C) on the DM PCB.
Check C8F19, C8F21, C8F22 and C8F27 (1000 uFD, 16V, 105C) on the FMT PCB.
If any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C).

I can help if anyone with this problem lives in Anaheim CA.

The set is trying to tell you somthing by blinking this light. And the bad news is that it's sayiny the DM board is not booting up, there are several problems that might cuase this all from bad capacitors to a shorted diode or a compleatly replacing the DM board. but all these are not for the weakend tv tech this one has to go into the shop