My Konica Minolta Magicolor 4690MF is exhibiting a very strange problem. Whenever I start to print something on the first 2-3 pages I get 2 or even 3 very ugly vertical bands - streaking with a mix of colors. The streaks are less visible on page 2 compared to page 1, on page 3 they are barely visible. Starting with page 4 the printout is perfect. I can print a 100 page document and except for those first 2-3 pages everything looks great. However if 30 minutes later I print another document the same problem occurs again (first few pages are dirty). Any suggestions as to what could be causing this?
Replace the image units associated with the color of the streaks
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: Streaks on printed page
You need to clean the printer. See your manual for instructions. It is probably dust on the laser lens
SOURCE: konica minolta magicolor 2400w printing proplem
pleas check transfer belt, and drum unit, probably these lines are caused by drum unit and you have to change it. also you can clean laser glass, what is under the drum unit. if both look fine you can also look at the fusing rollers.
200 views
Usually answered in minutes!
×