My granddaughter was pushing the buttoms and now the remote wont work
It is possible that you need to reprogram the remote.
1st you need to enter the remote into programming... Hold the Function button until the remote gives a long beep and LED light comes on the remote a (it takes about 8 sec.) Then press and hold the remote start buttom until the remote beeps 3 times and LED lights up. Now your ready to program the remote
One of the door has to be open . Insert the key - turn the key to the On position then press the button on the antenna once and then press it again and hold it
You hear a chirp and then you press the lock button on the remote and then you hear a second chirp to receive confirmation and then release the button and the turn off the key .
Remote should be program
If you need a new battery- There is a cheaper battery replacement site viperremotebattery.com and a youtube video how to change it. http://www.youtube.com/watch?v=GGnG5iCX0...
×
SOURCE: MY GRANDDAUGHTER had my remote and was pushing all the buttoms and now the remote wont work
Take out the battery from it battery compartment, and reinsert it again and check. If it do not help you, buy an other remote control.
Programming the Viper Remote Starter 5101
Unlock the doors before starting
Push and hold f button for 8-10 seconds until amber light is on solid
Push Remote start button for about 4 seconds till amber light flashes 3 times
Put key in IGN to the on position but don
450 views
Usually answered in minutes!
×