I just received a jack lalanne power juicer without the owners manual, how do I clean the juicer!!!! Help
You can donwnload a manual (pdf) from http://www.powerjuicer.com/pdf/classic.pdf
Or you can view a video - Power Juicer Assembly, by following this link http://www.powerjuicer.com/customer-manuals-video1.html
Eddy
PS - the video is shown for the Deluxe model but same procedures apply to the Classic
My juicer did not come with a manual but it did come w/ two tools. One is a brush to clean the blade and filter and the other is a tool to remove the blade from the base. The tool to remove the blade is a small half-moon shaped handle w/ two pegs that fit into the two holes in the blade. If you insert the tool into the holes, hold the outer rim of the filter in place and turn the blade counter clockwise, it will come right out. I don't use the brush because I just put all of these things in the dishwasher.
Ok, same situaition here. What we are asking is, how do you clean the portion under the metal grater, where all the juice goes? Does this get cleaned? Do you have to take the 3 little screws out? If someone would be kind enough to scan and post the user manual somewhere that would be fantastic! Post the location on this forum.
Thanks!
Paul
Ok, figured it out. I went ahead and took the 3 little screws out and noticed that you can unscrew the entire blade assembly without taking those screws out. But you need the right tool. Notice the 2 little holes in the blade, you need to stick something in them (I just stuck my screwdriver in one of them) and turn the blade counterclockwise while holding the rim of the metal mesh deal. It should losen up and you can take it all the way apart from there to clean the insides, which definately need cleaning. Good luck.
Paul
×
We can Fix your problem.
There is a Piece that came with your power juicer. It looks like an "ORANGE-Slice"
with two small-metal pieces sticking out from each end. These two metal pieces
fit perfectly in the two holes seen on the face of the grinder.
Hold the edges and twist left the grinder, lifts up, the orange rimmed strainer lifts up
as does the white nossel-piece. WALA.... wash...... dry ......replace pieces. Enjoy!
from,
The -Figure it out- Fairy
You pull the metal thigy away from the spout until it swings away, then you can disassemble it.
The metal "thigy"=The metal bar that curves over the whole thing.
___|_|____
| ] / } <- pulp container
|_]___|<--}--- top section
spout< ]<--|---}--- Metal bar thing
| L | }
|_^___|___}
|
|
pull this TOWARDS, Sorry about previous post, the spout.
Final Comment
×
I justh had the same problem and watched the video at the link given and it was very helpful. i did not have the manual or the tool to take off the blade so i grabbed to writing pens and gently turned the blade counterclockwise and wow! it worked! good luck and thanks for the help everyone!
Http://www.powerjuicer.com/pdf/classic.pdf
Very easy and simple to remove the blade. You just need to insert something into the two holes on the blade to be able to turn it - anything strong that will fit into those two holes, so you can turn the blade. I use two metal kebab skewers, and one time used the handle of my son's plastic paint brushes! Insert into two holes on top of blade, turn counterclockwise to loosen, then remove blade. Remove filter basket, then the receptacle. There is a demonstration on YouTube how to clean Power Juicer: http://www.youtube.com/watch?v=fDJkOPt5SPk
Hi, I was having the same trouble, on how to take the basket filter thing out, I tried to unscrew them but it didn't work, so don't unscrew it and put in something that will fit in one hole, in my case I used a thin scissors I had.... Hold the basket so it won't spin, and turn it clockwise... It wasn't working at first because it was so tight, so if ur doing the same and won't turn then it's because it's really tight and you just have to use force... To loosen it up, and then u can take all the pieces out and wash them, except the bottom part ( the motor) just wipe clean....;) Good luck...
When i turn my unit on I get no power
I just received a jack lalanne power juicer without the owners manual, how do I clean the juicer!!!! Help
Okay, Suewags23, your answer to the problem was not helpful in any way. I think Nappy1 was asking HOW TO TAKE IT APART TO CLEAN. I am having the same problem. Love the way the product after using for the first time, but mine did not come with a manual either. Oh, and again, Suewags23, your second little tip did not help either. I've been googling "manuals" for the product for half an hour now, and this post is the best it can come up with. I am assuming that nobody in their right mind would build a machine for conveinience and then make you use a screw driver to take apart and clean. There has to be a way to take the top portion off of the base, but I cannot figure out how. Is there a part you have to click? Turn it a certain way?? I've tried pulling and twisting at the same time, etc... it won't come off. Anybody know how to take the top portion off?
17,037 views
Usually answered in minutes!
Hi I have the same problem I just bought it and i do have a manual which isnt much help. I cant even figure out how to take the top part the filter and the blade off the base so that I can clean it before i use it
How do you remove the screen so that you can clean it?
CANT DISMANTLE BASE FROM UPPER SECTION WHERE BLADES ARE
same problem here
I receiver the Jack Lalanne Power Juicer and the instruction manual was not included. How to I dismantle the juicer in order to clean it?
CAN'T TAKE THE JUICER APART TO CLEAN IT.
How do I take my power juicer apart tp cleanit.
howw do you clean juicer
how do you take it apart to clean it
dont know how to take the screen out or off the juicer to clean it. jack lalanne power juicer. i dont have the owner guide. please help
I have the answer. I just used my Jack Juicer for the 1st time. There was no manual, but included was an orange handled tool. You insert the tool into the 2 holes opposite each other located at the bottom of the wire mesh. Turn the basket counterclockwise while holding the tool. Shirl
I use my jack lalanne power juicer an i need clean up please
don't know how to clean it
You can download the manual (pdf) from http://www.powerjuicer.com/pdf/classic.p...
Cheers
Eddy
how do you take it apart to clean it?
I don't have the "tool" that is mentioned to take apart the juicer. CAn it be done without it? I used a screwdriver to take off the blade, but I can't disassemble the rest. Help!
how do you take the juicer apart for cleaning
Cant get the rest taken apart to clean.
dont know how to clean
i do not have the tool or the guide...how can i take the screen out for cleaning?
i dont know how to clean power jucer
I purchased a jack lalanne juicer from a garage sale I don"t know how to really clean it
The top part how do i take off to clean?
I do not know how to take it apart to clean it. I unscrwed the grinder but can't get the top off.
how do i clean a juicer
How do I register my Black and Decker Juicer?
×