How do i set my g shock GA-110 - Casio G-Shock World Time Analog Digital GA-110-1A GA110 Mens Watch

In the Timekeeping Mode, hold down A for about three seconds until the currently selected city code flashes in the upper digital display. This is the setting mode. Use D (east) and B (west) to select the city code you want. Make sure you select your Home City code before changing any other setting.May 22, 2020

How to set time on Casio G-Shock GA-110 - CasioFan Magazine

In the Timekeeping Mode, hold down A for about two seconds, until "ADJ" appears on the display. Your current Home City code will be flashing on the screen. Press C to move the flashing in the sequence shown below to select other settings.Jun 21, 2020

How to set time on Casio AQ-S810 - CasioFan Magazine

https://casiofanmag.com > AQ-S810
About featured snippets

- Keep on pressing mode button on watch till alarm mode appears.
- to verify alarm mode check out the time alarm rings and match it with the display while selecting the mode.
- press adjust button to disable
- or press two buttons on right of watch to adjust the alarm

Hand home positioning normally has nothing to do with time setting.
Just set your local time and date and then you can do the hand home positioning procedure.This will not affect the time setting.If hands,after a while,do not show correctly,this means that the watch is under severe magnetic field, after severe shock or finally watch malfunction.
You must know that on this type of watches analog time follows digital time.

Try Amazone or ebay.

First set your local time, date and year and then run the "home positioning" (H-SET) procedure following manual instructions.If no any other problem exists, normally hands will "follow" digital time when watch is set back to time mode.

take the back off the watch then do this
Shortcut battery with AC contact. AC can be found on the sides of watch movement(very tiny). You have to use pointed tweezers: one end on battery+, another on AC contact for three secs

go here > http://www.gshock.com/support/ to download the manual

Hi,
Simple straight forward instructions in youtube video below:
https://youtu.be/R84_g7Wrw4E

Go to "setup" pushing mode sometimes then right down push should move analog clock

go to support page on casio. and get your manual. youll probably gonna look for a 3 or 4 digit number located at the back of your watch. once you got the manual. go to page 4. and follow the steps of "Hand Home Position Correction". that should fix it.

i also have ga 110c and i have encountered this issue