Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

Posted on Jun 12, 2017
Be the first to answer

Cannot change region code on my Cyberhome ch400

I FOLLOW THE TERMS BELOW BUT WHEN I GET TO VERSION AND PRESS ENTER IT DOES NOT COME UP WITH REGION

Cyberhome CH-DVD 400 / CH-DVD 402 / CH-DVD 405 / Prism DV-302 / Prism DV-402

  1. Turn on the player
  2. Open the disc tray
  3. Press SETUP
  4. Press 1, 3, 6, 9
  5. Press LEFT, LEFT, LEFT, RIGHT
  6. A new menu entry appears
  7. Select "Version", press ENTER
  8. Select region
  9. Exit menu

Answer This Question

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Feb 26, 2008

SOURCE: Can get to region unlock menu but refuses to change.

hi try this one there are 2 versions they both have different chips.

  1. Power Up the unit with NO Disc in the tray.
  2. Press the Setup button on your remote control
  3. Press the 1 button on your remote control
  4. Press the 6 button on your remote control
  5. Press the 9 button on your remote control
  6. Press the 5 button on your remote control
  7. Press the 1 button on your remote control
  8. Press the 8 button on your remote control
  9. Select the region code with the Number buttons or the Navigation Buttons on your remote control. 0 (Zero) for Multiregion.
  10. Exit the menu
  11. Press the Power Off button on your remote control
  12. Press the Power On button on your remote control
it worked for me.

Ad
Bubbabear64

Tim Babcock

  • 2794 Answers
  • Posted on Jun 14, 2008

SOURCE: the cyberhome no picture when playing a dvd on the ch-ldv 712

Sometimes portable DVD players allow you to switch to a secondary TV for playback. When this happens it disables the primary screen on the portable DVD player.

Thats usually the culprit as to why that happens.

If you have that feature on your portable DVD player you should check it out.

Anonymous

  • 1 Answer
  • Posted on Sep 09, 2008

SOURCE: Need remote codes

How about Sony remote codes?

Anonymous

  • 1 Answer
  • Posted on Jan 01, 2009

SOURCE: Need remote codes

I have DirecTV and I have the same remote and I read somewhere you can use the codes for Sampo. I found the codes in the DirecTV remote's manual. The first one I used worked. Hope this helps!

Anonymous

  • 1 Answer
  • Posted on Mar 12, 2009

SOURCE: disassemble CYBERHOME DVD CH 300

This guy has pictures and instructions for a major operation on a cyberhome player.
http://backandforthblog.com/?p=11

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Cyberhome CH DVD 300 (region 1), I want to change the region on this player. I learned I need for first: 1.- Turn On the DVD player 2.- The tray needs to be closed and empty 3.- Press the Menu...
  1. Turn on the player (without a disc inserted)
  2. Close the disc tray
  3. Press MENU, 1, 9
  4. Selection menu will be displayed
  5. Press ENTER
  6. Select region
  7. Press ENTER
  8. Press OPEN/CLOSE
Read full answer
Dec 07, 2010 • Cyberhome CH-DVD 300 DVD Player
tip

Cyberhome AD-N212 Region Free Fix Would you like to unlock your Cyberhome...
Cyberhome AD-N212 Region Free Fix

efc99c7.jpg
Would you like to unlock your Cyberhome AD-N212 DVD player to Region Free?

Follow these steps to unlock your Cyberhome AD-N212 DVD player:

  1. Open the drive tray
  2. Press the 7 button on your remote control
  3. Press the 6 button on your remote control
  4. Press the SEL button on your remote control
  5. You will now enter the hidden setup page
  6. Change the player toany Region or set it to Region Free by entering 13 as the country code.


Your Cyberhome AD-N212 DVD player is now Region Free.

I hope that helps.
Read full tip
on Apr 25, 2010 • Televison & Video
0helpful
1answer

Is it possible to change the region code to region 3 so we can watch movies from Thailand? No need to switch back as I have another DVD on region 1. Charlie ([email protected])
You can make this player REGION FREE so all discs operate on it.

Power up, no disk in. Status says READ then INSERT DISC.
Press MENU (status reads invalid key icon)
Press 1 (status reads invalid key icon)
Press 9 Menu is displayed.
Press ENTER on the region, digit turns to "-"
Press 0
Press ENTER again
Press EJECT to clear the special menu.

If you reset (unplug) the player for any reason - this will need to be re-entered.

Thanks for using FixYa!!

Read full answer
Mar 18, 2010 • Cyberhome CH-DVD 300 DVD Player
1helpful
3answers

Changing region code
you can change the region code with updates but its risky cos once you upload the update for the region code it may not let you play the other region coded games
Read full answer
Oct 01, 2009 • Sony PlayStation® 3 (60 GB) Console
2helpful
2answers

Problems changing region code on Samsung DVD player VR 375
HELLO!
Give these a try!
Power ON
Press MENU Enter code 57538
The current region code appears
For codefree/multi-region press 9
Press Open DVD door button
Power OFF and power ON

You could also try this!
Turn player on without disc inside Press MENU button
Enter your region code (See list below)
Highlighted 'region area number' will appear in the upper-left corner (on some players)
Press 9 to multi-region the machine
Turn machine off
Region 1 - 29334
Region 2 - 38767 (or 5 7 5 3 8)
Region 3 - 56732
Region 4 - 76884
Region 5 - 53814
Region 6 - 24462
Have a go and good luck! (:-)
Read full answer
Sep 11, 2009 • Samsung DVD-VR375 DVD Recorder/VCR
0helpful
1answer

Need remote code
try this method THIS METHOD WORKS FOR THE CH-DVD 300, CH-DVD 300S, AND CH-DVD 320
1. Switch player on, making sure that there's no disc in the tray.
2. Close tray.
3. Using the remote control, key in the following: MENU, 1, 9.
4. A menu will appear with the region option near the bottom of the screen.
5. Press ENTER, enter the desired region (0=REGION FREE )AND PRESS ENTER again to save the desired region.
6. Press OPEN/CLOSE. Hope this helps you with your problem
:
Read full answer
May 02, 2009 • Cyberhome CH-DVD 300 DVD Player
42helpful
5answers

Unlocking the LG HT303su DVD from region2 to region 0
Hi, I could not get it to work using the other ways, Also I am not sure if this might help I am in Australia region 4 and the below worked for me

(1) Make sure there's no disc in the system and turn it off. Turn the system on again and it will display a "no disc" message on your TV.

(2) Use the remote control: press the "PAUSE" button and then key in the code "314159"

(3) Your TV then displays a menu for choosing the desired region. Select "0" to make your unit an all region player.

(4) Press the "PAUSE" button again.

(5) Turn the system off and wait a few moments before restarting.
Read full answer
Mar 06, 2009 • Televison & Video
0helpful
1answer

Cyberhome dvd player ch-dvd 300 What region code is this dvd player? can it play region 2 dvd's?
Dear friend,
Try this method to change the region.
1. Switch player on, making sure that there's no disc in the tray.
2. Close tray.
3. Using the remote control, key in the following: MENU, 1, 9.
4. A menu will appear with the region option near the bottom of the screen.
5. Press ENTER, enter the desired region AND PRESS ENTER again to save the desired region.
6. Next press OPEN / CLOSE.
Read full answer
Nov 18, 2008 • Cyberhome Televison & Video
0helpful
1answer

Region Error
this is for: Cyberhome CH-DVD-300 1. Ensure the players disk tray is Closed with no disc . 2. Press Menu. 3. Press 1. 4. Press 9. 5. A menu will appear with the region number near the bottom of the screen. 6. Press Enter. 7. Select the desired region. 8. Press Enter to save the settings.
Read full answer
Jan 31, 2007 • Cyberhome CH-DVD 300 DVD Player
2helpful
1answer

Multi region for CH DVD 300
There's a tricky process to follow with the remote control to set the region code. It is: -Open the player. -Remove any DVD. -Close the player. -Power off the player. -Wait for 30+ seconds -Power on the player. -Press Menu,1,9 on the remote [this frequently takes a few tries]. -When the region screen appears, press enter to change region (Every time you press enter, the region code on the screen will increment by 1). -When the proper region code is displayed, press Return. -Open the player. -Insert DVD. -Close the player. -(Maybe just my player) If the player doesn't start the DVD, repeat Open/Close until the DVD starts. If it still doesn't start, power off for 10 minutes. Good Luck!
Read full answer
Jan 21, 2007 • Cyberhome CH-DVD 300 DVD Player
Not finding what you are looking for?

View Most Popular

CH-DVD 300 DVD Player

  • Televison & Video

Related Question

I have a Cyberhome CH DVD 300 (region 1), I want to change the region on this player. I learned I need for first: 1.- Turn On the DVD player 2.- The tray needs to be closed and empty 3.- Press the Menu...

  • Cyberhome CH-DVD 300 DVD Player

Related Topics

127 views

Ask a Question

Usually answered in minutes!

Popular Questions

Universal remote codes

Cyberhome CH-DVD 300 DVD Player

Universal Remote Control Codes

Cyberhome CH-DVD 300 DVD Player

Cyberhome CH-DVD 300 DVD - YELLOW light indicator of what problem?

Cyberhome CH-DVD 300 DVD Player

My DVD player won't turn on.

Cyberhome CH-DVD 300 DVD Player

Need remote codes

Cyberhome CH-DVD 300 DVD Player

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Cyberhome Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-CH-DVD 300 DVD...

CH-DVD 300 DVD...

PDF Manual
Manual. user-manual-CH-DVD 300 DVD...

CH-DVD 300 DVD...

PDF Manual
Manual. user-manual-CH-DVD 300 DVD...

CH-DVD 300 DVD...

Loading...