How to set viper 7752v remote on vibrate

SOURCE: i have a viper alarm with remote start the remote

the alarm is in valet mode .open a door press lock unlock lock on the remote and it should take it out of valet mode

SOURCE: viper 5701 remote

read the owners guide look at page 11 remote control programing you have to follow the instructions after your in the programing mode go to page 12 look at the unlock symbol and finish the programing

SOURCE: my viper alarm remote just beeps flashes TX and

Try to reprogram this. If this routine does not work please let me know and we will try something else

SOURCE: How do I lock my keypad

there is a way to do it in the manual which can be found at www.viper.com/support.... i did it by mistake and now can't figure out how to turn it off

SOURCE: disable viper alarm

Yes the best way is disarm the alarm and put in a Valet Mode
To activate the Valet Mode do the following:

There is a push button or toggle switch to disable the alarm (to engage the valet mode). Without knowing where this
switch is you won't be able to disconnect the alarm.

1. Put the key in the ignition and turn it to the "on" position.
2. Flip the toggle or hold the push button for at least 5 seconds.
3. The LED. light will stay solid on.
4. Turn the ignition off
5. Release the push button. If you have a toggle leave it alone in step 2