Can anyone tell me what it is and how to resolve it?
Thanks!
C-2220 When the transfer belt motor
(M18) was ON, M18 abnormality
detection signal was continuously
detected for the specified
time.
solution
Printer control board (PRCB)
Transfer belt motor (M18)
Transfer belt unit abnormality
When the transfer belt motor (M18) was ON, M18 abnormality detection signal was continuously detected for the specified time.
Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu
645 views
Usually answered in minutes!
×