Error code h01 - Hoover Washing Machines

Is yours a Bosch machine? On Bosch the H01 usually means you have turned on the Delayed Start feature on the machine. H01 means the wash cycle won't start for one hour, H02 means it won't start for two hours.
Try this website to see how to turn it off.

Many owners of the Bosch dishwashers perceive h01 (h: 01) or h02 (h: 02) and other signs as an error. But in fact, this is not an error, and you accidentally got into the start-up timer menu (delayed start of washing dishes). In this case, h01 means that washing dishes will start exactly in 1 hour; if the display shows h02, then washing process will begin exactly in 2 hours. As a rule, in most models of dishwashers from Bosch, a delayed start can be set in the range from 1 to 24 hours.



Timer programming You can delay the start of the program in 1-hour steps up to 24 hours.

1. Close the door.
2. Switch on ON/OFF switch [1].
3. Press button [4] + until the digital display [9] jumps to h:01
4. Press [4] + or - button until the displayed time corresponds with your requirements.
5. Press START button [6], timer programming is activated.
6. To delete timer programming, press the [4] + or - button until h:00 is indicated on the digital display [9].

You can change your program selection at any time until the program starts.




FOR LINK https://bosch-dishwasher-errors.com/bosch-dishwasher-error-code-h01-h02/

Many owners of the Bosch dishwashers perceive h01 (h: 01) or h02 (h: 02) and other signs as an error. But in fact, this is not an error, and you accidentally got into the start-up timer menu (delayed start of washing dishes). In this case, h01 means that washing dishes will start exactly in 1 hour; if the display shows h02, then washing process will begin exactly in 2 hours. As a rule, in most models of dishwashers from Bosch, a delayed start can be set in the range from 1 to 24 hours.
Read more at https://bosch-dishwasher-errors.com/bosch-dishwasher-error-code-h01-h02/#uGUAe8vpcVfLM3YX.99

http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/laundry-fault-codes/3328-panasonic-na-series-washing-machine-fault-codes.html

H01
Pressure sensor or level switch detected as out of range

• Check wiring to level sensor
• Check pressure switch is not defective
• Replace pressure sensor
• Replace main power PCB

Its not an error it means its in delay start mode. Hold down the delay start button (looks like a clock) for 5 seconds and it should clear

The manual isn't much help, is it?

http://www.retrevo.com/support/Yamaha-DVD-S80-DVD-Players-manual/id/320ag210/t/2/

It seems the "H01" is some kind of common and fatal error code in many disc players and I have yet to find anyone who has paid the ransom, er cost, to get one fixed as it is cheaper and makes more economical sense to just buy a new unit...

http://www.electronicspoint.com/panasonic-sc-ht75-dvd-player-broken-t55762.html

Error H01: Ink color setting error Cannot get consumables info inut values required. Enter the required parameter value. (1: black / 2: color)
---
Error P18-531: Type P18: Drum-lock-solenoid lock. Point 531: Print dum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated. Hints: Check mentioned sensor. Check mentioned solenoid.

H01 means that there is an alignment problem or there's a faulty lens mechanism. Align it would cost about $50 . If there is a faulty part , then cost would start from about $80 labour plus part.

You appear to have a pansonic K Mech model.
H01 is the code for no drum motor or drive.

it means no head motor rotation...The full meaning is given as: After Cylinder lock is detected the cylinder does not start rotating again even after tape unloading.
The remedy/ check is given as: Check the cylinder motor drive circuit... sorry no solution but at least you know whats wrong..