When i scan to email, i get an error; "send error 2202" and the document is not sent to email. The Kyocera fs-1028mfp printer is connected to the LAN using a network cable.

Google suggests the following for same error
How to guides for KYOCERA Devices - 3101 (google.com)

empty drum unit its full of waste toner each side of drum unit has plastic covers that pop off empty out the unit thoroughly and vacuum inside

PCL error is telling you that the printer does not understand the data being sent. Could be a corrupt or incorrect driver, or the program you are printing from is sending corrupt data.

u130 dev unit set up and u251 clear main count

try formatting the hdd

This is an error is indicating a connection error when using the send feature.

Below I have provided some information or for more information download the users guide from the manufatcures website using this link. http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=16088&rid=16313

2101, 2102, 2103, 2201, 2202, 2203, 3101:

The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is

not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name

correctly.

2204: The E-mail size exceeds the acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f:

Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.")

9181: The scanned original exceeds the acceptable number of pages of 999. Send the ecess pages separately.

Hope this is helpful,

Shawn

The following errors are simalir;

2101, 2102, 2201, 2202, 2203, 3101:

The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name correctly.

The link below takes you to Kyocera's Scan to SMB setup guide on GFBM's website (they are a Kyocera dealer). The guide setup guide is good and gives pictures and examples.

http://gfbm.net/Documents/self_help/SCAN%20TO%20SMB%20PC%20setup%20R3.pdf

I hope this is helpful,
Shawn

hi
i think this is
http://www.kyoceramita.eu/dlc/eu/documentation/usermanual/fs-1028_1128mfp_operation.-downloadcenteritem-Single-File.downloadcenteritem.tmp/FS-1028MFP_FS-1...8MFP_OG_ENG.pdf

hello

email address entry found on page 20
download this manual via link below
manual link = http://www.kyoceramita.co.uk/dlc/gb/documentation/usermanual/fs-1028_1128mfp_setupguide.-downloadcenteritem-Single-File.downloadcenteritem.tmp/FS-1028_1128MFP_...ENG)_Rev.1.0.pdf



general info + driver download link = http://www.kyoceramita.co.uk/index/products/product/fs1028mfp.html

hope this helps