I cant find the driver for my konica minolta Di1611 for windows xp. can you help me download it's driver?

Self Help Product Support Konica Minolta Business Solutions Inc

Try this site

Download the driver on to konicaminolta.com page.

try this site


Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

I found a Minolta site in Germany where you can download drivers for win 98. For the newer Windows (2000, XP, Vista, 7 and 8) the drivers are already in Windows. Second link is for the transfer software.
Link to drivers for Minolta in Win 98
link to Konica Minolta transfer software

This is a very old post; however, maybe someone could use my help :).

The Konica Minolta Di2011 can be ordered with a built in printer module or not. The difference is that when you have the printer module, it works on PCL, but if not, it will only work using a GDI emulator.

For Win XP, you can find very easily the drivers on Konica website.

The drivers for Win7 64bit, especially the GDI Emulation for DI2011, cannot be found on the website.

I have found on the Konica Minolta website the STD GDI emulator for some other models and I have tested the one for the printer Konica Minolta 162.

It seems it works without problems for now, however I was only using it in A4 mode - manually selected. I have found that it requires a manual selection of the paper size and tray as it will not switch automatically.

I hope this helps.

BR S.H.

Konica Minolta Photo Imaging, Inc. ceased its Camera Business Operation as of 31 March, 2006, and since 1 April, 2006
Sony Corporation has been providing customer service for Konica's, Minolta's, and Konica Minolta's cameras (excluding Film-in cameras) and camera-related products except for the binoculars.

Please be informed upon the termination of the Agreement between Sony Corporation and Konica Minolta Photo Imaging, Inc..
Konica Minolta ceased the entire customer services for Konica Minolta cameras and related products, as of 31 December, 2010.
After 1 January, 2011, the Repair Service Providers will continue support for the repair service independently.
To view the list of Repair Service Providers for each region, please click HERE.

There are monochrome only printer drivers on the Konica Minolta Site at this page (you'll have to scroll around on the page a bit to find them)
http://printer.konicaminolta.com/support/current_printers/mc2430dl_sup.htm

for example, the driver for Windows 2000/XP is downloadable at:
http://printer.konicaminolta.net/drivers/windows/2430dl_xp_mono.exe

Hey all, after a load of grief, and NO help from the INTERWEB, I have chanced upon a solution. Firstly I installed a new local printer with IP number for network printer and associated network address/port (\\server\konicami). Then I installed the win7 64 bit bizhub162 drivers. Then I installed the win7 64bit BH 164 drivers and put an additional driver of x86 win2000 on the properties (server has win2000). Then, when I selected the BH162 driver in printer properties driver pull down menu, it worked. wahey.

Konica Minolta 7145 Drivers
From the above link from Konica Official Support you can download the drivers accodding to the Operating System you have on your PC. (Drivers for Windows XP, 2003 & MAC are available)

Hope it helps! Good Luck!
CreativeTECHNOLOGIES

I guess konica does not provide drivers for Xp
but its got driver for older versions.
here ,worth a look.it might work for xp.
follow this link
http://www.errorforum.com/driver-downloads/21966-minolta-konica-e-mini-m-camera-driver-windows-98-98se-me-2000-driver.html