LG WM-2277HW Front Load Washer - Answered Questions & Fixed issues
Buttons not working on lg washer
I had this problem with another model LG washer dryer and the problem was just the tiny switch (6mm x 6mm) on the circuit board had worn out. They cost about 30 pence on eBay and are very easy to remove and re-solder onto the circuit board as there are only 2 pins. This saved a huge amount of money for a new control board.
11/7/2022 12:32:12 PM •
LG WM-2277HW...
•
Answered
on Nov 07, 2022
•
6,833 views
Suds leaking out a port on back of washing machine LG WM4070H*A
I did all the steps to ensure was right soap and amount, used cleaning tablets to keep odor down. I took it in my own hands and made an overflow and vent. Self explanatory with pictures. More than a year, no suds, no odors. the exit has a short incline to avoid normal splash and the fan on secondary catch chamber keep a constant low air movement. Two outdoor electrical boxes, fan, and pvc, I know, overkill.... Hope it helps someone.
2/26/2022 2:36:52 PM •
LG WM-2277HW...
•
Answered
on Feb 26, 2022
•
2,260 views
LG Tromm Not Dispensing Bleach
My wife has been complaining that the bleach and fabric softener dispenser still had water in it after washing. After removing the top to the washer I found that there are 4 components to the dispenser. 1. the solenoid (part of a 3 solenoid bundle) for the cold water, 2 the controller to the solenoid 3. The hose from the solenoid to the dispenser, and 4. The dispenser. After checking that there were no kinks in the hoses. I checked the solenoid found it had power at the right time but the flow was low. I shut off all the water and disconnected the lines going into the back of the washer I found that the cold water filters were clogged. After cleaning them (there were 2 for each hot and cold) The washer worked correctly.
2/17/2022 8:33:07 PM •
LG WM-2277HW...
•
Answered
on Feb 17, 2022
•
5,526 views
Will not spin, error code 6e
It is funny I don't know why nobody will listen to the original post I too have a LG Tromm. I am getting the either 6E or bE he is not mistaken when he says this is the code that comes up the same thing is happening with mine any answers would be greatly appreciated?
3/11/2021 9:27:41 PM •
LG WM-2277HW...
•
Answered
on Mar 11, 2021
•
1,994 views
Lg tromm washer leaking from front door
We have the same problem with our LG washer. Don't think the door can be adjusted but I'm not for sure. I think the gasket is wore out but haven't checked on fixing the problem yet because it barely leaks.
10/27/2020 3:13:02 PM •
LG WM-2277HW...
•
Answered
on Oct 27, 2020
•
2,235 views
Hall sensor
No. Actually, the Hall sensor, part number 6501KW2002A, is covered by a 7 year part warranty.
7/28/2020 2:32:08 AM •
LG WM-2277HW...
•
Answered
on Jul 28, 2020
•
1,768 views
WW2277HW
My guess is replace the drain pump. Inexpensive part but kinda hard to get to. Check out repair videos on parts sites or YouTube
9/10/2020 6:14:53 AM •
LG WM-2277HW...
•
Answered
on Sep 10, 2020
•
314 views
LG WM3001HPA washer (front load) - have to drain
Your drain pump assembly impeller has most likely deteriorated. I just replaced the assembly on my unit. There are actually two small motor/pumps. I would recommend replacing them both. You will find the videos of how to do this on youtube.
I bought the parts off of Amazon
9/23/2019 6:20:41 PM •
LG WM-2277HW...
•
Answered
on Sep 23, 2019
•
1,937 views
LG Tromm washer constant DE door error problem
A DE Error Code is indicative of a “Door Error”. This indicates that the washing machine
door is not shutting, locking or opening. This means that there is something faulty with the door switch and locking mechanism . You should get this replaced or you may have water where you do not want it. biigg53566
8/13/2018 3:24:54 AM •
LG WM-2277HW...
•
Answered
on Aug 13, 2018
•
19,673 views
Wm2277hw is leaking water from the bottom...
Easiest start is to take the top off and check for leaks maybe using a flashlight. Top comes off by removing a couple of screws in back, the sliding it rearward about 3 inches and then lifting up. Good luck. Report back what you find. Use comments.
1/25/2018 10:57:45 PM •
LG WM-2277HW...
•
Answered
on Jan 25, 2018
•
1,240 views
I have a lg wm2277
Switch to powdered detergent. You'll be much happier in the long run. Liquid detergent leaves a residue. Eventually the residue mildews. Powered detergent leaves no residue. Plus you will solve your current issue. Also skip the softener and use plain white vinegar in its place. The vinegar helps eliminate mildew and it also helps release Dey from your clothes in the rinse cycle.
1/7/2018 5:13:24 AM •
LG WM-2277HW...
•
Answered
on Jan 07, 2018
•
288 views
My lg tromm wm2277hb wont
Suggest try same again.
Modern appliances have a zillion circuit connections of which any one of them can develop a "bug".
Unless it is under warranty it's usually less trouble and cost to simply replace it.
1/2/2018 6:23:04 PM •
LG WM-2277HW...
•
Answered
on Jan 02, 2018
•
445 views
Does anyone know how to remove the top cover of
Disconnect the LG front load washer power cord from the wall outlet. Turn off the water supply to the washer at the water spigots coming from the wall.
Pull the washer 3 feet away from the wall, and disconnect the water supply hoses from the water inlet valve ports on the back of the washer. You may need a pair of channel lock pliers to loosen the hose connections.
Remove the screws securing the back of the top panel to the back of the washer with a Phillips-head screwdriver. Depending upon your model, you will have either two or four screws to remove.
Lift the back of the top panel up, and slide the top panel toward the rear wall, which will unhook the top panel from the clips securing the panel in the front of the washer. Lift the top panel off the washer and out of your working area.
12/27/2017 5:40:02 AM •
LG WM-2277HW...
•
Answered
on Dec 27, 2017
•
234 views
Washer stinks when the water goes IN.
As water goes in, it vents air out back of washer. Try adding a cup of bleach to tub, fill softener dispenser with bleach and run an empty load on the hottest setting possible. You have mildew built up on outer drum. Do this once a week for awhile until smell goes away. Stop using softener. It leaves a residue in drum that can mildew. Use powdered detergent instead of liquid. The liquid also leaves a residue. Use plain white vinegar in place of softener on every load. It helps stop mildew since it is slightly acidic and as a bonus it helps remove soap residue from your clothes-plus it's inexpensive compared to softener. Leave door ajar after every wash and wipe down rubber door gasket on all sides. Good luck.
12/25/2017 4:19:25 PM •
LG WM-2277HW...
•
Answered
on Dec 25, 2017
•
306 views
I have an LG2455HW which
that's a bad thermisitor the code is tE that's a lower case t and a capital E part number 6322FR2046C it's down at the bottom of the tub to the right of the heater.go here to see part
https://www.searspartsdirect.com/part-number/6322FR2046C/0026/795.html?modelNumber=WM2277HW&categoryName=Residential%20Washers&brandName=LG
11/11/2017 12:28:55 AM •
LG WM-2277HW...
•
Answered
on Nov 11, 2017
•
166 views
Not finding what you are looking for?