Top 20 HP J3680 Officejet All In One Printer Questions & Answers

You answered your own question. Cable phones are digital Voice over IP devices. Your printer is looking for an analog phone like is connected to a land line the telephone company provides

The link below will take you to all of the answers at hp support about resetting your printer. Without more info about what you are trying to reset (password, power on reset, reset after paper jam, etc.) this is all the help I can give. HP Officejet J3680 All in One Printer Support search results

try to disable the wait for dial tone from menu

fy 3308 b megenta is poor and blockeg giv solve

You can download the HP printer drivers from their support WEB site. Please click on this link and select your model printer to download :- http://welcome.hp.com/country/us/en/support.html

Hi Charlie,If you had the cartridge in the printer for sometime, try replacing it.OR Is this recently installed Cartridge ? Try the method for both criteria.Remove the cartridge, Clean the electrical contacts ( golden dots ) with lint free cloth, Install the cartridge and the error should disappear. If this does not work, Try contacting HP Tech support ( 1-800-474-6836 )Regards,Sean

The problem could be due to a communication failure between one of the printheads (cartridges) and the All-In One (AIO) or by a short in one if the printheads. Please follow the steps below to identify and fix cartridge issues: 1. Make sure the printer is on. 2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-In-One is busy. Note: If the carrier does not automatically move to the center, turn off the printer or unplug the printer from the power source and then carefully slide the carrier to the center. 3. Remove both cartridges from the carrier. 4. Close the printer cover. 5. Re-brick your printer by pulling out the power supply - black box behind the printer where the power cord is plugged in to, and re-plug after 30 seconds. 6. When the printer turns on, reinsert one cartridge first. Close the printer cover and check for any errors. 7. If no error appears, reinsert the other cartridge. Close the printer cover. 8. Replace whichever cartridge is causing the error to appear with a new genuine cartridge. Try to print a document again to verify that the problem is fixed.If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

Hello try to renew the software from here:http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3441026&Please select your windows system 32 or 64 bit version.And click next.Uninstall ALL the old software before you install the new one.Disconnect the USB cable while you install the new softwareand put it back in when the installation program tells you so.I can`t tell you about the firmware because you have not written what windows version you have.Good luck

Just select the printer to print. No need to disable.

kindly open your fax document feeder and look the paper feed sensor it must stack.release it your problem will be solved

stepsto sending fax, can not find book

U cant silly

The caller ID phone having the tip & ring detection circuit to detect the incoming phone number, but in this model doesn't have tip & ring detection circuit to display other phone number but after connecting the other fax it will read the information which was stored like company name & phone number of other one..

Remove both cartridges, switch off then on, printer detects cartridge missing, install cartridges one by one & observe which one showing faulty, replace faulty cartridge..end..

You mean align page not scanning/not completed?.if align page not printed properly due clogged nozzles, printer unable to completes align successfully, remove both cartridges clean nozzles as shown in attached link, refix & try, even not resolved replace faulty cartridge, or else when its performing the align printing cancel it,but every time when switch on the machine it will print align page..http://www.youtube.com/watch?v=0nWCTKPaBlo

Solution by Vinay Kumar Kuchipudi

You mean align page not scanning/not completed?.if align page not printed properly due clogged nozzles, printer unable to completes align successfully, remove both cartridges clean nozzles......

You can download printer software/driver that you can use to install your printer to your computer, just click HERE and proceed with the download.

This could be a faulty cartridge or you may have installed a expired cartridge , try replacing the cartridge with a new one, if that doesnt work, then try a hard reset.

A hard reset = unplug printer from the wall,
press and hold the power button for 45-60 sec then plug back in and turn on.
That should clear the error.

if the cartridge is not sensing poperly this error may occur.clean the cartride contact and try it.

the following link may useful to you.


http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01571812&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3441011