ESQ 07301132 Aerodyne watch - Answered Questions & Fixed issues
I just bought this watch
set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.
1/23/2013 7:16:27 PM •
ESQ 07301132 ...
•
Answered
on Jan 23, 2013
•
1,410 views
How do I set the
1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync mode.step 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.
1/4/2012 10:49:57 PM •
ESQ 07301132 ...
•
Answered
on Jan 04, 2012
•
1,405 views
Setting time day date in ESQ Aerodyne
1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.
9/13/2017 7:19:04 AM •
ESQ 07301132 ...
•
Answered
on Sep 13, 2017
•
3,863 views
Watch doesn't work
It would be difficult to state with certainty, because it wouldn't likely be possible to determine how long the watch was in storage before you received it.
Most watches will need batteries between 2-5 years after their manufacture.
Higher-priced watches could easily be that long on the shelf before sale, but I would contact the seller with your complaint.
The seller should at least be conscientious enough to ensure the watch is running prior to shipment.
11/20/2009 12:38:09 PM •
ESQ 07301132 ...
•
Answered
on Nov 20, 2009
•
352 views
What battery do I need for a ESQ Swiss men watch model # E5081
Here where we live we have a store that replaces watch batteries. I took mine in and he took the back off and took the old battery out and went to his battery stock and replaced it for me. He did all the work and only charged me three dollars. He has batteries for all makes.
3/5/2019 9:00:32 PM •
ESQ Watches
•
Answered
on Mar 05, 2019
•
711 views
How do I take out a link from my ESQ watchband?
you need to go to a jewelry place, or walmart, you need a special tool called linkage removal tool. it has one job and only one job and thats all it does removes pins and reinstalls pins
it is a very small press, the shaft of the press is about 1/64 inch
10/1/2015 6:25:01 PM •
ESQ Watches
•
Answered
on Oct 01, 2015
•
132 views
I am trying to set
Need instruction on how to open clasp on Oceania esq watch?
3/20/2013 7:12:58 PM •
ESQ Watches
•
Answered
on Mar 20, 2013
•
706 views
I have a ESQ watch
The best shot you have at finding out what this watch is, would be to take it into a Watch Repair Shop. They have books that identify watches by the make and mode, and I have found information on a lot of rare watches that way. Take the watch in, and they can probably identify it and give you an estimate as to it's value.
Good luck, and hope this helps.
3/28/2011 6:09:45 PM •
ESQ Watches
•
Answered
on Mar 28, 2011
•
552 views
I need a pin &
fixed by jewelry store. Needed new pin & barrel. thanks
9/17/2008 12:45:19 PM •
ESQ Watches
•
Answered
on Sep 17, 2008
•
147 views
Not finding what you are looking for?