Breadman TR2200C Ultimate Bread Maker - Answered Questions & Fixed issues
Stopped stirring, jammed sound
Had a problem like that let water in too long soaking.
It seized up.
Put olive oil on the shaft and let it soak in,
Then turn the shaft back and forth til it loosens up.
Don't let water sit too long and don't use oil that you wouldn't drink.
My machine still works great,
We had also other inquiries for the same model since the pan gasket it seems to be a weak point. However the pan is out of market which led out of stock from all online shops. So as other were lucky we sugest to purchase a used whole unit from ebay in a good price We have make a search and there is a couple of good options at the moment but if you refer you can watch it for some days .
http://shop.ebay.com/i.html?_nkw=Breadman+Ultimate+TR2200COur opinion is to act fast and take the oportunity to have your in working order and as plus to have other parts for future so you will not need a replacement for long time more.
I NEED A MANUAL AND RECIPE BOOK
You could probably go to a fed ex kinkos and ask them to go online and print one out for you. If you want me to email you the manual or email the manual to your fedex kinko's guy I could do that too. Just visit them and ask them how they want you to handle it and email me.
[email protected] or try the breadman website and order one from them.
Does this have a convection oven?
Another possibility is that the two prongs that couple the motor in the base with the rotor in the baking pan can slightly bend when kneading heavy breads. This slant can create a force that pushes the pan upward while kneading. This is the same principle as rotating a vertically mounted screw causes it moving up or down. A simple solution is to use pliers to slightly bend the prongs in the direction of rotation to make them exactly perpendicular to the rotation plane. The prongs should be visible when the baking pan is removed. There is a well in the center of the base and inside that well there is an S shaped blade mounted on the spindle of the motor, which the ends of the S bent at 90 degrees upward. Those two ends push the two arms of the rotor in the baking pan. You should first determine the direction of the rotation by starting the machine (it is clockwise in my machine), and then grab each upward end of the S-blade with pliers and bend it slightly in the SAME direction as the assembly rotates.
Bread maker paddle didn't spin at all although the motor work.
Turn your machine on its side and remove the bottom panel with a screwdriver. You will probably find that the belt has broken. If you want to try replacing the belt let me know ($20.00 for belts) send me the code off the belt. It will look something like this STS S3M471
Not finding what you are looking for?
