Viper 7152V Remote Control for 5701 System - Answered Questions & Fixed issues

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/

Video

https://www.youtube.com/watch?v=X3TWwH-nABk

Viper Support Center - How to turn on the Auxiliary buttons

https://www.viper.com > support > guideTitle=How-to-t... Step 1:Click on the car name located on the top right hand side of the app. Step 2:Click on Vehicle Settings. Step 3:Click on Aux Buttons.

Check the difference in the remote codes.

Would like to know this as well. Having the same issue

Please provide more information in regards to your problem.

Refer that question to the manufacturer of the device.

On many of the Viper models, the symptom you are describing is because the remote battery is low. The remote can't be too far from the vehicle. If it is, the system see it as you forgot about the vehicle being remote started, and shuts it back down. A weak battery creates a weak signal and makes the unit 'think' you are far away. The Viper website has instructions on how to disable the whole system, there are many different versions, so find the box and get the model number from it, you will need that to get any further.

vehicle make, model, year?

It has been damaged. Buy an other one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

spray oil into lock

I assume you are talking about the sound the body computer generates, I would suggest taking it to the dealer to get it re-programed if that is the problem.

hellllllllo........go to goggle enter model number the video will appear battery # CR-2016...........tkx.......g.scott

if no spark then you need to check the coil pack it sounds like it may be the problem..

0223. Check this code. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

ignition switch maybe .

I don't believe that you need to configure it. It should be preconfigure to work. What i think after revising the manual and from past experience with car remotes, the type of socket used for the battery inside the remote itself is often missing or broken solder. To make this more clear, the battery socket might need to be resolder on the small circuit board inside your remote. good luck

It is possible that you need to reprogram the remote. 1st you need to enter the remote into programming... Hold the Function button until the remote gives a long beep and LED light comes on the remote a (it takes about 8 sec.) Then press and hold the remote start buttom until the remote beeps 3 times and LED lights up. Now your ready to program the remote One of the door has to be open . Insert the key - turn the key to the On position then press the button on the antenna once and then press it again and hold it You hear a chirp and then you press the lock button on the remote and then you hear a second chirp to receive confirmation and then release the button and the turn off the key .Remote should be program

either the battery is too weak or you dropped it and antennae is messed up, or a transistor in the electronics is fried. I fix the remotes if you search ebay 7752 remote battery service. contact me there and I will look at it. If I cannot fix it, no charge just shipping.

you can charge it from your computer if you have a mini usb cable like one from a camera would work. Also if you have an old cell phone charger that has the mini usb connector on the end will work. The motorola driod x charger would be a perfect match. If you need to replace the battery because the remote will not turn on any more I replace the batteries on ebay search viper 7752 remote battery service. Hopefully this helps.

Take out the battery from it battery compartment, and reinsert it again and check. If it do not help you, buy an other remote control.