20 Most Recent Frigidaire GLGH1642DS Front Load Stacked Washer / Dryer - Page 2 Questions & Answers

Hi, Please power cycle your dryer and attempt to run it again. If this fails, please ensure that your clothes are evenly distributed so that they weight of the clothes doesn't cause the dryer to be shutdown. Just to double check, please ensure that you've cleaned the lint track of your dryer. Lastly, you can use an power outlet extender to help switch the power outlet that you're using to run your dryer as there might be something wrong with your current one. Thank you.

There could be several issues that could cause your Frigidaire dryer to stop running after just a few seconds. Here are a few potential problems to consider:

1. Thermal fuse: The thermal fuse is a safety device that shuts off the dryer if it overheats. If the fuse has blown, the dryer will not run.
2. Clogged dryer vent: If the dryer vent is clogged, it can cause the dryer to overheat, which could trip the thermal fuse.
3. Faulty cycling thermostat: The cycling thermostat regulates the dryer's temperature. If it's faulty, the dryer may not run for more than a few seconds.
4. Faulty start switch: If the start switch is faulty, it could prevent the dryer from running.
5. Faulty door switch: The door switch prevents the dryer from running when the door is open. If the switch is faulty, the dryer may not run.

To fix the problem, you'll need to diagnose which of these issues is causing the problem and then replace the faulty part. I recommend having a mechanic diagnose and fix the problem for you.

The E11 error code indicates a problem with the gas sensor DE32-60011A and or the wire harness DE39-40678D. Unfortunately the manufacturer has discontinued the sensor. You may want to try contacting local parts dealers, one of them might still have it in stock. Enter your part number in a search engine, a smaller company might have it or try eBay, Amazon or similar sites . Search by using the manufacturers part number. Try a used appliance store, sometimes they have the same model or a usable part for your machine.

If it is new, didn't it come with an operating manual? Videos here https://www.google.com/search?q=Frigidaire+Gallery+GRFC23534FO+sabbath+mode

How do I set Sabbath mode on my refrigerator? - Frigidaire

https://www.frigidaire.ca > ... > FAQs > Refrigerators Depending on your model, the Sabbath mode is turned ON or OFF by simultaneously pressing and holding for 5 seconds both the:"v" and "+" orThe freezer "-" and ...

Help and videos in the link https://www.google.com/search?q=frigidaire+stackable+washer+not+agitating ..

Try power cycling it. Disconnect from the mains supply for 5 minutes and plug back in. Try again. If that doesn't fix it, you need a service call.

https://www.appliancepartspros.com/repair-help/frigidaire-washer-ftf2140es0-repair/ftf2140es0-wont-start.html This may help.

Hi, Please attempts to use oil to help gently open the door . Or you can start the machine and attempt to open the door then. Running the machine might free up the lock somehow. Thank you.

Question edited for clarity. Question moved to Frigidaire. Normally, you have to remove the top of the siphon. Cleaning the tray often doesn't work. Or you can remove the drawer, turn it over and run hot water into the hole until it clears.

On many machines the E11 error occurs as one or more of these connecting wires break, this may be due to excess movement from unbalanced loads. To prevent this when washing any heavy items ensure there are enough heavy items to spread around the drum to help the machine balance its load.

https://video.search.yahoo.com/search/video?fr=mcafee&ei=UTF-8&p=is+lint+in+a+dryer+a+fire+hazzard&type=E211US1494G0#id=2&vid=a999dc7d047af3d527d222986bacfbde&action=click Yes Make sure the screen is clean and the exhaust/exit system is not restricred.

bad temp sensor

You have the hoses hooked up wrong. Reverse them.

why not call for service they have tools to fix things you do not have and more important skills. why not contact maker Frigidaire dot com and ask for screws. and or prime help in your unstated town. or country.

Question edited for clarity and translated into written English :>D I think they are belt driven. It needs replacing. It is the same as the fan belt on your car, they stretch, wear and slip. Or is has a clutch? google make model parts https://www.google.com/search?q=%22frigidaire+twin+tub%22+washing+machine+belt+replacement ..

https://www.appliancepartspros.com/search.aspx?model=met1041zas2

damaged drum --bracket --motor