Frigidaire FRS3R5EMB Side by Side Refrigerator - Answered Questions & Fixed issues

Replace the evaporator grid.

is the fan running ion the freezer is the compersser runing and the cond fan >??

Good Morning Friend, I understand you are receiving an "SY EF" code on your Frigidaire refrigerator, model# FRS3R5EMB. The "SY EF" code stands for system error with the evaporator fan. This possibly means that there is something going on with your evaporator fan or it could possibly be a false error code. . I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. -Best Regards- WP

The Flashing #4 occurs when power is applied to the fridge and the control board goes through it's cycles and didn't detect a damper connection. So its your air damper thats bad. part# is 241600906

I would call Frigidaire. Ask if they have a remedy. Most likely there are others with this model having same problem

those clicking sound comes from the solenoid

this problem needs to be checked by a qualified technician

fixya doesnt sell products or replacement parts search on line using make and model for part or notify manufacturer for a parts distributor in your area

Did you check the motor and/or damper mechanism that directs cold freezer air into the refrigerator portion. If that is messed up the freezer is ok but fridge is ng. Also look at door seals for proper sealing.

Hello Leslie176, They are called reverse twist bolt/screw extractors.. The prettiest I have ever seen came from EASTMAN restoration products.. You are looking for the variable sized set that fits into an ordinary soct wrench with... EXTENSION (should get you into the filter housing... ELSE You will hhave to replace the whole Filter housing IRWIN HANSON Hex Head Multi Spline Screw Extractor Set 25 Piece 53227 Hex... Check out the eBAY version (you don't need QUALITY STUFF for plastic Hanson AHN53204 7 32 034 Hex Head Multi Spline Screw Extractor Bulk NEW...

I have had the same problem, and can't fix it at the refrigerator. You need an presure reglator or bladder on your hot water heater. when you have to much pressure it usually starts causeing problems at the hot water heater with leaks and works its way down in other areas of the house. We put a regulator at our water meter at first and it did not help.. if it is leaking at your fidge, you may want to check other appliances. Hope this helps

Unplug your refrigerator from the ac outlet, and 0open theref door for approx. 5 minutes. Then plug it again, after you hear the beeping close the door. wallah it's fixed.

What is the water line that you would like to install is it attaching to the refrigerator your question or is it a water line that goes under the refrigerator and to the dispenser or the ice maker? Is the model number of the refrigerator correct within your post? Appliance 911 Sea Breeze

Hello Chuck, thank you for your post! From the information you have provided you are receiving low water pressure at the dispenser on your Frigidaire refrigerator. This could be due to a dirty or clogged filter and I would check to see when you last replaced it. I have researched model FRS3R5EMB and show the water filter is part number WFCB. If you have changed your filter within the past six or nine months the low pressure could be due to an obstruction within the water line or an issue within the dispenser. Since it could be anyone of these underlying issues I would recommend having a professional technician out to perform a proper diagnosis and repair. This will help you to avoid any unnecessary part purchases. I hope that this information is helpful to you. -Matt

Hello Gladys, thanks for your submission! I understand that your Frigidaire refrigerator is not sealing properly. You could be experiencing an issue with the gasket or the hinges. I would suggest checking the door hinges to assure that they are secure in position. You can also use a dollar bill to test the door gasket. Place a dollar bill in between the door and the body of the refrigerator. If the dollar bill pulls out with no to little resistance, you may need to replace the door gasket. I hope that this information is helpful to your repair. -Matt

fridgidaire makes cubed ice but crushes ice. could be push button on door, mechanism that crushes ice, if not mechanically inclined please call refrigeration tech to check out.

Good Afternoon Friend, I understand you want to know how to make your Frigidaire refrigerator, model# FRS3R5EMB, stop beeping. Please try pressing the "On/Off" button on the Fresh Food Temp side of the control panel. If that does not work, I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful. -Best Regards- WP

Good Morning Brett, thanks for your inquiry!

I understand that your Frigidaire refrigerator is flashing a "4" and you would like to know what that means. The "4" on your display means that there is a damper failure within your refrigerator and I would recommend checking the damper in the rear of the refrigerator to assure it is opening and closing. The damper is located in the back of your refrigerator. I would place your hand back there to assure it is blowing cold air into your refrigerator. If the damper is not working it could be a potential issue with your damper, main control board, or wiring harness. I would then recommend performing a reset on your refrigerator. You can do that by unplugging the power cord for roughly ten minutes. If this does not help resolve your issue I would recommend having a professional technician out to perform a proper diagnosis and repair. Best of luck! -Matt

Replace water inlet valve; diaphragm leaking through. Use in-line filter prior to valve before replacing valve. You probably have heavy-water.

Test if you're getting power to the dispenser water-valve in back near bottom while depressing the dispenser activator on front. Should have 120 volts. If you have voltage, make sure water is on and screen is clean. If so, replace valve. If no power, bad dispenser activator. Make sure power getting to activator.

the fan has probably gone bad or stuck due to moisture try to oil it it may loosen up if not replace it.