20 Most Recent Thermador PRG304US Gas Kitchen Range Questions & Answers

Turn off the main panel breaker for a few minutes, then back on to rest the board. For the reset to work both the oven control AND the oven temperature need to be in the off position.

There are two places that I can think of that just may have the part(s) you need. Search Over 2 1 Million Appliance Parts Sears Online In Store Shopping Appliances Clothing More

Hello & Welcome to FixYa

This indicates an open/shorted oven temperature sensor and to solve this problem the sensor needs replacement. If you want to be sure before replacing the sensor then you can test it with a voltmeter for around 1100ohms....if it reads more than this then it needs replacement however, if the reading is around or less then 1100ohms then it is the control board that needs replacement. Please get back to me if you have any other questions. Kevin

What igniter is trying to be replaced,is it for the surface burners or the oven and what difficulties are being encountered

Could you provide the part number of the control? Alternatively, you can look here for more information that may help diagnose the problem.

Hi, I have the same stove purchased in 2003. Same problem. I really like to get this oven working again so if you find any solution please let me know. I will post it if I find any solution also.
Thanks!

Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...Gas Range Repair Burners Keep on Clicking

heatman101

I am having the same problem. Have you found any solution?

look at D&L stor

Hi,
The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating
http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

Oven Problems Replacing the Igniter http://www.fixya.com/support/r4572625-oven_problems_replacing_igniter

heatman101