Whirlpool LGV4634JQ Gas Dryer - Answered Questions & Fixed issues
I have a whirlpool dryer
Hi,
There can be many reasons why your dryer will not start or turn...
The most common causes are the belt breaking or jumping off, or the motor goingbad...
Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...
Dryer Repair - The
Dryer is not TurningDryer Repair - The
dryer will not startheatman101
7/14/2011 4:15:10 AM •
Whirlpool...
•
Answered
on Jul 14, 2011
•
144 views
Dryer does not have heat.
Hi,
If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly.
if you dryer is gas check out this
gas no heat tip....
If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat.
check outthis
electric no heat tip...
heatman101
';
';
'
;
6/12/2011 2:04:04 AM •
Whirlpool...
•
Answered
on Jun 12, 2011
•
45 views
My whirlpool gas LGB6300PW0 dryer
Hi,
There can be many reasons why your dryer will not start or turn...
The most common causes are the belt breaking or jumping off, or the motor goingbad...
Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...
Dryer Repair - The
Dryer is not TurningDryer Repair - The
dryer will not startheatman101
5/18/2011 1:27:43 AM •
Whirlpool...
•
Answered
on May 18, 2011
•
327 views
Gas does not ignite.
Gather your tools and follow directions listed.
First start the machine.
Infront there is a little sqaure plastic cover. pop it off and see if you see a glow. If not then grab a quater inch nut driver and take the big black cover off the back. Of course unplug the unit. There you will see a little skinny white fuse. Take one wire off and test continuity. If yes then go to the igniter and check voltage. If not then then the fuse is bad and needs replaced. You can not reset it. Further assistance I am by the phone 877-293-1739 - 574-232-8040 I have the part instock can ship tomarrow for around 13$
3/13/2011 11:19:13 PM •
Whirlpool...
•
Answered
on Mar 13, 2011
•
63 views
My dryer heats up,, glow works, igniter works,,
Hi,
If you are having problems with your
gas dryer not heating the most common problem is that the ignitor
goes bad. Even though it glows sometimes it is still not working
properly.
if
you dryer is gas check out this gas
no heat
tip....
If you have an electric dryer, you can
have many different things that can go wrong causing the dryer not to
heat.
check
out this electric
no heat
tip...
heatman101
1/15/2011 4:14:37 AM •
Whirlpool...
•
Answered
on Jan 15, 2011
•
90 views
I have a Kenmore series
when it's in auto all it does is the heat comes on,reaches temp. then the heat shuts off,when the heats off then the timer advances,when the heat comes back on the timer stops.pop off the plastic cap on the left hand side of the front panel,put clothes in the dryer and run it,after 15 to 30 minutes look in the hole in the front panel and make sure the flame is still liting,also did you clean out the duct that the lint filter slides into.remove the vent line and if that's a long run blow it out with a leaf blower,i had one guy say his vent line was clear and he used a leaf blower and blew out a birds nest,then unplug the dryer,remove the back panel,on the left side take out the four screws and remove the duct and clean that out and the blower wheel,also remove the thermostat on the blower wheel housing and look at the back of it,if lint is stuck on it clean it off and put it back in and try that.also you said you changed out the gas coils,when you removed the out coils on the large coil there's a spacer that goes on the post and sometimes when you remove the coil it gets stuck inside the old coil or if after running the dryer for like 20 to 30 minutes and the flame doesn't lite you have bad gas coils,when they heat up they fail when they are going bad and that will stop the timer from advancing.let me know what you find and if i can help with any questions let me know
1/8/2011 3:21:45 AM •
Whirlpool...
•
Answered
on Jan 08, 2011
•
267 views
We have a 10 year
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
1/3/2011 12:31:03 AM •
Whirlpool...
•
Answered
on Jan 03, 2011
•
202 views
Have a Whirlpool LGR4634EQ1 dryer and it all of a
There are quite a few things to check on a gas dryer.
- Gas valve coils
- Igniter
- Flame Sensor
- Thermal Fuse
- High Limit Thermostat
- Cycling Thermostat
Here is a video to walk you thru the process of doing the diagnostics on the dryer to find the failed component.
12/31/2010 6:12:07 PM •
Whirlpool...
•
Answered
on Dec 31, 2010
•
314 views
Dryer will not heat, plus timer will not move
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
,,,,,,,
12/13/2010 4:22:12 AM •
Whirlpool...
•
Answered
on Dec 13, 2010
•
150 views
Hi
My Whirlpool Estate GAS
Hi
You are right, Thermal fuse is blown due to the clogs/blockage in the lint screen. When the dryer overheats due to blockage in the lint screen, the thermal fuse cuts off the heat to the dryer and as it cannot be reset so it should be replaced. You can also take the rear panel to test the Thermal fuse which is located on the blower wheel housing. Hope this helps...please post back for further assistance.
Daniel
12/9/2010 10:15:00 PM •
Whirlpool...
•
Answered
on Dec 09, 2010
•
243 views
How do I ignite my
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
10/18/2010 12:26:45 PM •
Whirlpool...
•
Answered
on Oct 18, 2010
•
82 views
Not finding what you are looking for?