20 Most Recent HP Officejet 5610 All-In-One InkJet Printer - Page 6 Questions & Answers

Sir/Madam I suggest You Watch You Tube Video For HP Printer Entanglement Papper http://www.youtube.com/watch?v=9cCC0cCmBs8 or Go To official HP Printer Website For Your HP Printer Problem Below Link On: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00441807&cc=us&dlc=en&lc=en&product=441125 In case You Still Having Hp Printer Problem and Need Online assistant Then follow Us On: HP Printer Support

Can you tell me whats the Operating SYstem you have installed on hp pavilion..

Most printer run on java

I had the same problem and just got it to work. go to
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00577763&lc=en&dlc=en&cc=us&lang=en&rule=22243&product=441125

go to the section "Moving the carriage" turn on printer and then unplug power. If you still cant move the carrage then remove both toner cartridge and all the trays. Then completely disconnect printer and stand it upright (so paper feed and cartridge tray is on top) Look thru the paper feed area to the left side of toner carrage and you will see a little plastic tab around the bottom back of the carrage. That tab is suppose to be inside a track on the bottom of the carrage. I think that when we put in or took out toner we must have pushed it to hard and that piece jumped out of the track and has "locked" the carrage. I just pushed the carrage up carefully and used a letter opener to move the plastic tab back into place (tab is spring loaded) print working fine now. Hope this solves your problem

You may download the HP drivers and software from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=441125&

http://software.canon-europe.com/products/0010159.asp

I Got it! I just did something similar, black ink in color slot. At first I tryed prying and yanking and wiggling all to no avail. When I actually stopped and looked at it, I could see a little lip sticking up on the back left side of the cartridge, the chamber is made for a little lip CENTERED-so used my left hand on the side of the ink to push it to the right so that the lip would slip through the slot in the chamber while I pulled with my right hand-IT WORKED!!!! Came right out! If you put the color in the right (wrong but (R)) side-try pushing from the right to the left while pulling out. The key is to LOOK and guide the lip on top of the cartridge through the little slot opening in the chamber. Good Luck!

go into the menu and look for copy/print settings. you should see an option to lighten or darken the copy. It should look like a ascending /descending slider. tap to the left for lighter or to the right for darker

check follows :- print Black Cartridge nozzals, if jam Replace black cart. Head carriage assembly or replace

r u capable to remove ADF from Printer ? if yes ? Make sure printer's power is off. remove ADF from printer , clean 2 paper pickup roller,Pad, gears and sensor. reinstall ADF properly to printer. now turn it on. may be prob will solve. From : A Printer Repair engg

will u clean paper feeder assembly, paper sensor ? will not ? clean paper sensor its a bottom of paper fee. assytry other things.. change u r paper feeder assy.change u r head carriage assy. cable. it has 20 pin cable.change u r head carriage assy...