20 Most Recent HP 5590 ScanJet Flatbed Scanner - Page 8 Questions & Answers

Question edited for clarity. 3 Questions made into one question, 2 duplicates deleted. Refresh page to see your question. Please don't type in all CAPS, it is considered SHOUTING and harder to read. There are three different colour of lights. All explained here.

blinking information red light - HP Support Community

hp.com https://h30434.www3.hp.com > td-p Jun 29, 2020 - 1) Take out the cartridges. 2) Unplug the power cord from the printer & wall. 3) Wait for 30 seconds. 4) Plug the power cord back into ... Missing: 890c ‎' Must include: 890c

• HP Deskjet Printers - Blinking Lights ' HP® Customer Support

  https://support.hp.com > ca-en > document Follow these steps to reset the power module. Disconnect the power cord from the rear of the printer. Unplug the power cord from the electrical outlet. Unplug ...

• Blinking Lights on the HP Deskjet 900 Printer Series

  https://support.hp.com > us-en > document > bud09170 These lights can be on, off, or blinking (flashing), depending on the status of the product. Blinking lights can indicate error conditions.

First, make sure the printer is connected to a power source and the power is turned on. If it is, try disconnecting the power cord from the printer and wait a few seconds before reconnecting it. Also make sure the power cord is connected to a working outlet. If these steps do not help, your printer may require additional maintenance or repairs. I recommend contacting HP Support for assistance.

f the scanner on your HP OfficeJet Pro 7720 is not returning to the home position when making a copy from the original glass, there may be an issue with the scanner mechanism or the position sensor. Here are a few things you can try to troubleshoot the problem:

1. Perform a power reset: Turn off the printer, unplug the power cord, wait for a minute or two, then plug it back in and turn the printer back on. This may help reset the scanner mechanism.
2. Clean the scanner glass: If the scanner glass is dirty or has smudges, it may cause the scanner to slip. Clean the glass with a soft, lint-free cloth and a non-abrasive glass cleaner.
3. Check for obstructions: Make sure there are no obstructions, such as paper clips or debris, preventing the scanner from moving freely.
4. Reset the printer to default settings: In the printer's settings menu, reset the printer to its default settings. This may help resolve any software issues that could be causing the problem.
5. Update the printer's firmware: Make sure the printer's firmware is up to date by visiting the HP support website and downloading the latest firmware.

If none of the above steps resolve the issue, there may be a hardware problem with the scanner mechanism or position sensor. In this case, it is recommended to contact HP support or a professional printer technician for further assistance.

First, try to clean the print head by following the steps below: 1. Remove the old ink cartridges and clean the print head nozzle with a damp cotton swab to remove any dried ink. 2. Reinstall the new ink cartridges and print a test page. 3. If the test page is still blurry, try running the printer's alignment utility. This is typically accessed through the printer's settings or system preferences. 4. If the alignment utility doesn't help, try manually doing an alignment page directly from your computer. Be sure to follow the instructions from the printer manual or from the printer manufacturer's website. 5. If the alignment page is still blurry, try reinstalling the cartridges to ensure the cartridges are securely in place. 6. If all else fails, you may need to replace the ink cartridges

The issue you are describing with your HP Laserjet 6L printer could be caused by a few different things. Here are a few steps you can take to try to resolve the issue:

1. Clean the printer: Over time, dust and debris can build up inside the printer and cause various issues, including problems with paper detection and print quality. Use a clean, dry cloth to gently wipe down the interior and exterior of the printer. You can also use compressed air to blow out any dust or debris.
2. Check the paper tray: Make sure that the paper is loaded correctly in the paper tray and that the paper guide is adjusted to the correct size of paper. Also, check the paper pickup roller for any debris or wear. If the roller is dirty or worn, it may not be able to properly pick up the paper.
3. Check the toner cartridge: If the toner cartridge is running low, it may not be able to produce a dark enough image, which could result in the grayish text you are seeing. Consider replacing the toner cartridge to see if this resolves the issue.
4. Check the printer settings: Make sure that the print settings in the printer driver are set to the correct paper size and type, and that the print quality setting is set to a high enough level to produce clear text.
5. Check the fuser: The fuser is a component inside the printer that heats up to fuse the toner onto the paper. If the fuser is damaged or worn, it may not be able to properly fuse the toner, which could result in poor print quality. Consider replacing the fuser to see if this resolves the issue.

If none of these steps resolve the issue, it may be necessary to take the printer to a qualified technician for diagnosis and repair.

This error usually indicates a problem with the USB connection between the HP printer and the computer. Some common solutions to try to solve this problem are: 1. Verify that the USB connection of the printer is well connected to the computer. 2. Try disconnecting and reconnecting the USB connection to make it recognized by the computer again. 3. Verify that the computer has the correct drivers for the printer. If not, download and install them. 4. Check the USB settings in the BIOS. 5. Try using other USB ports to connect the printer. If none of these solutions work, contact HP support for help.

If your HP Scanjet 200 is not working, here are some troubleshooting steps you can take:

1. Check the power supply: Make sure the scanner is properly connected to the power source and that the power cord is securely plugged in. If it's connected to a power strip or surge protector, try plugging it directly into a wall outlet.
2. Check the USB connection: Make sure the USB cable is properly connected between the scanner and your computer. Try using a different USB cable or a different USB port on your computer.
3. Check the scanner driver: Make sure the scanner driver is properly installed on your computer. You can download the latest driver from the HP website and reinstall it.
4. Restart the scanner and computer: Turn off the scanner and your computer, then turn them back on and try scanning again.
5. Clean the scanner glass: If the scanner glass is dirty, it can affect the quality of the scanned images. Clean the scanner glass with a soft, lint-free cloth and a non-abrasive glass cleaner.
6. Check for error messages: If there are any error messages displayed on the scanner or on your computer, check the HP support website for more information on how to resolve them.

If none of these steps resolve the issue, it may be necessary to contact HP support or a professional technician for further assistance. They can help diagnose and fix the problem safely and effectively.

Error code 62.2 on an HP LaserJet 2420 printer usually indicates an issue with the printer's internal memory or storage. Here are some steps you can take to troubleshoot this issue:

1. Turn off the printer and unplug it from the power source.
2. Remove any accessories or optional components that are installed in the printer, such as an optional paper tray or additional memory.
3. Power on the printer and see if the error message has cleared. If it has, the issue was likely caused by an incompatible accessory or memory module.
4. If the error message persists, try resetting the printer to its factory defaults. To do this, turn off the printer, press and hold the "Go" button, and turn the printer back on while continuing to hold the "Go" button. Release the button when the printer's attention light turns on and all other lights turn off.
5. If the issue still persists after resetting the printer, it may be necessary to replace the printer's formatter board, which contains the printer's internal memory and storage.

As for the slow response when using the printer's keys, this may be caused by a separate issue. Here are some steps you can take to troubleshoot this issue:

1. Check the printer's display for any error messages or other indications of a problem.
2. Make sure that the printer's firmware is up to date. You can download the latest firmware from HP's website and install it using the printer's embedded web server or HP Web Jetadmin software.
3. If the printer is connected to a network, try connecting it directly to a computer using a USB cable to see if the issue persists. If it does not, there may be a problem with the network connection.
4. Try resetting the printer to its factory defaults, as described in the previous section. This may help to clear any configuration or settings issues that are causing the slow response.

try following directions here... https://support.hp.com/my-en/document/c05126409

1. Turn off the printer and unplug it from the power source.
2. Wait for a few minutes, then plug the printer back in and turn it on.
3. Check if the error has been cleared.

If the error persists, you may need to perform a firmware update. You can do this by downloading the latest firmware from the HP website and following the instructions provided to install it on your printer. If you continue to have issues with error #c3-1312, it is recommended to contact HP Support for further assistance

It seems like you've tried several troubleshooting steps to resolve the issue, but the problem persists. A common cause of black pages with a laser printer is a faulty toner cartridge, but since you've tried replacing it, it's unlikely that's the issue. Another possibility is a problem with the imaging drum or the transfer roller, both of which can cause black pages. You may also want to check the toner supply system, including the toner level sensor, for any clogs or blockages that may be causing the problem. If these steps don't resolve the issue, it may be necessary to seek further assistance from a professional repair service

Error 50.00 in HP Laserjet M5035MFP usually indicates a problem with the fuser unit. To resolve the issue, try these steps:

1. Turn off the printer and unplug it from the power source.
2. Wait for a minute, then plug it back in and turn it on.
3. If the error persists, check the fuser unit for any visible damage or obstructions.
4. If the fuser unit is damaged, it needs to be replaced.

If the issue persists after trying these steps, consider contacting HP support for further assistance.

Hi, try replacing the laser unit

Turn the printer on, and replace the cartridges if possible. If the carriage moves, but there is still a grinding noise, there may be a paper feed issue. If the carriage will not move, then it is a carriage stall issue.

The Printer Makes a Grinding Noise When It is Turned On or ...

https://www.google.com/search?q=HP+DeskJet+Ink+Advantage+1515%2C+printer+keep+making+a+grinding+noise

When your HP printer is not working properly on your device, you can check the status of your HP printer cartridge and replace it. Check this article - https://www.printeralign.com/fix-hp-printer-wont-print

The "Scanner error 2" message on an HP LaserJet 3052 printer typically indicates a problem with the scanner assembly. To resolve this issue, you should turn off the printer, unplug it from the power source, and wait for a few minutes. Then plug the printer back in and turn it on again. This will often clear the error and restore normal operation of the scanner. If the error persists, you may need to contact HP technical support for further assistance.

If your HP Color LaserJet 4700 is printing with shadows, it could be caused by a few different issues. Here are a few potential causes:

1. Toner Cartridges: The toner cartridges may be low or empty, causing the shadows to appear. It is recommended to check the toner levels and replace the cartridges if necessary.
2. Toner Smears: The toner smears on the drum or the fuser can cause shadows to appear on the printouts. Clean the drum and fuser with a lint-free cloth and check if the problem persists.
3. Fuser Unit: The fuser unit could be malfunctioning and may need to be replaced.
4. Paper Quality: Using low-quality or damp paper can cause shadows to appear on the printouts. Use high-quality, dry paper for better results.
5. Printer settings: Some printer settings can also cause shadows to appear, such as toner density or print resolution. Ensure that the settings are set to the recommended level.
6. Dust or debris: Dust or debris inside the printer can cause shadows, Clean the inside of the printer and check if the problem persists.

It is important to diagnose the specific cause of the problem before attempting to fix it. If you are not comfortable with troubleshooting the problem, it is best to contact HP support or a qualified technician for assistance.

some cartridges [aftermarket] are not recognized or compatible with unit --installed wrong--danage or dirty donnection --damage or failed circuit

The error message "50.2F.00" typically refers to a problem with the fuser assembly in an HP LaserJet 500 color M551 series printer. The fuser assembly is responsible for fusing toner to the paper, and this error can occur if the fuser is not functioning properly. There are a few potential causes for this error message:

• The fuser may not be properly installed in the printer, in which case you should check to make sure that it is securely seated and connected.
• The fuser may be defective, which is most likely the case if the error message appears shortly after installing a new fuser. In this case, you may need to replace the fuser with a new one.
• There may be a problem with the printer's power supply, which is causing the fuser to malfunction. You should check the connections and ensure that the power supply is working properly.

It is also good idea to check for any firmware updates for your printer. Sometimes these updates can fix known issues. The best thing to do is check the printer's manual for troubleshooting or HP Support for specific instructions for your printer. Also you can try to call the manufacturer support.

Hi, please ensure that your printer is not overheating from extensive operating first. If so, please it off for 30 minutes before using the printer again. If you have any external usb drives attached to the printer, please remove them, restart the printer via the power button and check the display again. If all else fails, you might need to factory reset your printer to be able to overcome this issue. Thank you.