20 Most Recent
Fujitsu Siemens PlasmaVision P42VHA40 Monitor - Page 7 Questions & Answers
Cooling Fan does not work so after a short while the laptop trips
Hi have you tried the fan on another socket usually more than 1 fan connector on a mobo, it may not say cpu fan but at least it will check the fan. If the fan is duff then a repalcement will be required. If you take the fan to a computer shop they should be able to test it for you and most likely for free.
I can not remember pasword
Is it system password (OS) or BIOS?
For BIOS, remove the CMOS battery for 30 seconds and it clears the password.
For system, try to login to your PC in Safemode and then change the profile password.
I carnt log on
try to answer your secret questions and reset your password by chosing "forgot password" option. If it is BIOS password you are referring to, go ahead and remove CMOS battery for 30 seconds and plug it in. Password gets cleared.
Microphone not working
You may not have selected the Mic in the setup procedure. Go to the lower right and where the icon for a speaker sits, right click on that. When open you have options and open one or more of the options to select mic. input and mic output and/or volume.
Buzz when start
BUZZ ? The so called buzz can be either the CD ROM spinning when you start up or the cooling fan. Other than that, the only sounds could be speakers, and/or the hard drive. Hard drives when making noise usually CLICK over and over with no booting of the operating system.
Loose charger connection
If it is the power pin on the laptop itself then it could need a repair or even replacement, sometimes it could be the ac adapter plug that connects to the laptop that has worn and it simply needs a new ac adapter, either way it will need replacing.
If the power pin is part of the mainboard then it can be re-worked, but sometimes they cannot and it will be a mainboard replacement, good luck.
All projecters doees not recognise my laptop
this is not a projector problem. For this you should use the hotkey on your laptop once connected to the projector to switch your display to the projector. On most computers this is fn( lower left of keyboard) + f4 or alt f4. The longer way to do this is to go to control panel and select display and select display number 2
Not finding what you are looking for?
