20 Most Recent Fujitsu Siemens PlasmaVision P42VHA40 Monitor - Page 4 Questions & Answers

backup important docs, then format hdd, install win, and drivers and software

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCwQFjAA&url=http%3A%2F%2Fdocs.ts.fujitsu.com%2Fdl.aspx%3Fid%3D8515c87b-d9de-4b4f-8ab9-d60175717876&ei=LCVuU8WSBIiYyAT7_YBg&usg=AFQjCNGfuWC6xiGAcZr9Dsm0N3fMXPvSlw&sig2=mwq7IL9yo5Qym3p4ngqHJw&bvm=bv.66330100,d.aWw If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_d799f810c7212a78

goto fujitsu.com and look into support menu.

Your wallpaper normally won't change unless you have a program running somewhere that randomizes the images for you. Perhaps something was uninstalled that did this for you, or a recent installation of another program disabled it.

Hi there.
For some strange reason the beep code you describe is not listed anywhere.
But, you can try this >>>>>
Get a can of compressed air and give short blasts through the air vents and the CPU fan (located under the laptop).
If you cannot get a can of air blow through the vents as hard as you can to get the dust out.
Take the battery out of the laptop, open the ram cover and take out the system memory, clean the contacts and slots with a soft, clean, dry paintbrush, put just one memory module back in the slot and plug the AC jack in (not the battery) and try to power up.
Please post back with the results.

Good luck and thanks for choosing FixYa!!

open control panel and go to "sound" then check what it's set at.

on the FB homepage, click the link as indicated and follow instructions from there

Touch screens rely on drivers. Re-install the drivers. If this does not work the screen probably needs to be replaced. The screen image does not reflect the state of the capacitance resistance touch function.

Hi you should put your graphic card to slot 0 pcie. Switch your on card on and uninstall drivers. Put your graphic in correct slot and power up your machine and check if is detected by system, then install driver for it. If successful restart and disable on board card.

kindly see the given link and find your driver... Support Downloads FUJITSU Singapore

bbb Normally you need to hold the left CTRL Key plus the left shift key. While holding these two look for the button that say scroll lock or cursor lock and hit that one. This will turn it off.