Canon PIXMA MP150 All-In-One InkJet Printer - Answered Questions & Fixed issues

Get Amazing Bali Holiday Trip Packages with View Holiday trip Plan your amazing and cheap Bali Holiday Tour Packages and create memories on this beautiful island. Newly Wed couples explore Bali Honeymoon Packages.Bali tour package for couple, Bali holiday packages,Bali holiday trip packages,book bali indonesia trip packages in delhi,Bali holiday tour packages,Bali indonesia tour,bali holiday packages,Bali tour and travels agency,Bali holiday trip packages,Bali holiday tour packages,Cheap bali holiday trip packages,Cheap bali holiday tour packages,bali packages,Bali family tour package, Bali honeymoon package, Bali packages, bali couple package, best tour packages in india, bali island tour, cheap bali honeymoon package for more Details Call Us +91-9311539278 Visit on:-https://www.viewholidaytrip.com/book-bali-indonesia-holiday-tour-packages

that is usually a scanner error, the unit will need to be returned to canon or serviced.

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad);

Canon printer error 5100 describes a physical problem, either with a paper jam or an improperly seated ink cartridge. Resolving the error is a quick process, requiring only a few standard procedures. The Canon printer error 5100 indicates that something is jamming the cartridges, that is, the process of the cartridges going and returning is being hampered, so what I recommend is if any of you have a continuous ink system installed in any of these printers, check if this system is not letting the cartridge or rather the head with the cartridges reach where it has to go. If after discarding the previous solution, the printer still does not work, we recommend taking the equipment to technical service to determine the cause of the problem and provide a better diagnosis. I Hope my Answer will Resolve you Printer error. If Not check this : Canon printer error 5100

Hope this helps
With thanks to a canon tech 
Ok Well again I will repeat this answer with a titch more detail.
The 6A00 is a Canon generic code for paper path jam. Some where in the paper path a sensor is activated indicating paper jam so the printer will give off a 6A00 code. As a Canon tech, I usually find the code, almost 90% of the time, is related to the purge unit being jammed with something and not being able to move. Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like. And yes I have found all those things in a purge unit. The offending item needs to be removed or the purge unit needs replacement. A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel. 
Incidently, the 6A00 error pertains to all Canon printers made in the last several years, its not just used in one model. And its always a paper path error or purge unit.
I forget myself so here goes, the purge unit, called a spittoon assembly in an HP, lexmark, and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing. That is why you'll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow.

Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Try Canon U.S.A. : Support & Drivers : Consumer & Home Office

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

Note: if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just press the Resume/Cancel button at least 10 times and the printer will be returned to step 4 automatically
Canon Pixma iP4200, iP5200, iP6000, iP8500 Reset Procedure

1. Turn off the Printers.
2. Hold Resume button click POWER.
3. Hold button RESUME, release POWER
4. Then press the button again twice RESUME.
5. Release all the buttons.
6. Indicator led in green and stay green.
7. Click the button 4 times RESUME, if you want to make another transaction.

error 5100 in all Canon printers is almost always something simply blocking the carriage.

http://www.fixya.com/support/p360639-canon_pixma_ip1600_printer/manual-10271 click this link and check out the instructions page by page.this will help. thanks.

plz check the link below
http://www.fixyourownprinter.com/forums/inkjet/50418#1

download from here https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mp-series/pixma-mp150 Driver link

Did you reset the printer so it would accept a refill? https://digitalgraphy.wordpress.com/2008/11/19/refill-and-reset-the-canon-mp150-printer/

hi Fulminater. this is all i could find out from the internet. Scanner driver will be closed : Code 2250. Take it to a Canon Repair company, It has a 1 year warranty and needs to be replaced or call 1-800-ok canon. check can't work the scanner because the cartridge are not inserted. this is all i could find out.

You would need to download and install a service program ( search google or similar for "MP190 reset"), then disassemble the machine to get to the waste ink pads in the base of the machine. Remove wash and dry the pads and re-install. Re-assemble the machine and then run the service program to reset the waste ink counter. It is a lot of work for a relatively old machine.

Hello,

E42 means scanner error. It's posible to be dirt scanner timing sensor or the whell. You can check videos on youtube to find how can fix this issue in detailed mode.

All the best !

The main reason of Canon Printer error code 5100 If you receive Canon printer error code 5100 message this means you need to reset the printer. This also signifies that your computer does not recognize the printer. Your printer will show this error code because the LED is blinking. If your PC does not recognized the printer then it will also affect your printing jobs and you will not be able to do any printing work. When the error code 5100 appears in your Canon multi functional printer then the Printer LED light will blink. This also means that you need to reset your printer. You must fix this error as quickly as possible. For instant technical support please contact Canon Printer Technical Support.

Tips to Resolve Error Code 5100

• The Canon printer will show error code 5100 to warn the user that there is some problem.
• In order to fix the problem, you require to opens the top of the printer.
• In the right side of the printer you need to search for the waste ink absorber pad.
• The next step is to clean the waste ink absorber compartment with a paper or cloth. This also completes the resetting process of the printer.
• Inspect the paper feed area of the printer and confirm that there are no obstructions or paper jams in the printer that may be responsible for the error.

Dial our toll-free number +1-800-213-8289 for quick online assistance for resolving technical issues relating to the Canon printers. Our Canon Printer Support Number service is available for fixing technical glitches of our customers. Please get in touch with our tech support team and will receive online remote technical help at highly reasonable charges. Our Epson printer support technicians are always ready to sort out each and every printer related issue with latest solutions offered to its clients. We are a team of fastest printer tech support solution provider for every issues related to all printers such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc. If users are unable to solve this problem, they are welcome to drop us an e-mail and we promise to get back to them in short time span via our professional printer contact details. So, come and join us for tom experience our exceptional level printer solutions to your unexpected and critical issues. And also our Canon printer technical support technicians are always ready to sort out each and every printer technical issues with instant solution. We also provide instant remote support for Brother Printer technical support services for your common printer errors such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc. How to Fix Error Code 5100 in Canon Multi functional Printers

I had this problem it turned out to be a paper jam I could see it sitting under the front rollers behind the ink cartridge transport. I removed the back panel and then the transport cover exposing the paper. I then gently removed the paper. That sorted it no problems. PIXMA MG7520 Removing jammed paper cassette 1 automatic double sided...

You can download and install the Canon printer drivers from the
Canon WEB site. Please click on this link and select your model printer :-
http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

If you wish to get some details about printer repair; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Hi there- Below are a list of the error codes for this model. E16-E19 = Failed to scan head alignment sheet. You can find this information at http://www.usa.canon.com/cusa/home CANON MP140, MP145, MP150, MP160 RESET ERROR CODES [Info140] RESET ERROR CODES CANON MP140, MP145, MP150, MP160 E2-2 = No paper (ASF) E3-3 = Paper jam E4 = No ink E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly E8 = Waste ink absorber full, or platen waste ink absorber full E9 = The connected digital camera / video camera does not support Camera Direct Printing E14 = The Ink cartridges whose destination are wrong E15 = Ink cartridge is not installed E16 - Ink remaining is unknown E16-E19 = Failed to scan head alignment sheet E22 = Carriage error E23 = Paper feed error E24 = Purge unit error E25 = ASF(cam) sensor error E26 = Internal temperature rise error E27 = Waste ink absorber full or platen waste ink absorber full E28 = Ink cartridge temperature rise error - E29 = EEPROM error E33 = Paper feed position error E35 15 = USB Host VBUD overcurrent error - USB E37 17 = Abnormal motor driver error E40 20 = Other hardware error E42 22 = Scanner error