Konica Minolta bizhub 350 All-In-One Laser Printer - Answered Questions & Fixed issues

Replace the black developer unit and black drum

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What are trying to reset ?????

Did you mean C-0204???????? There is no C-024

Agree as above.

An abnormal speed signal of the paper feed motor (M4) is checked. An error detection signal is detected twice in succession

developer abnormal

Pess utility printer setting print report and then print what you want

First u need check your USB CABLE or USB connector is working or not

A new belt will have to be installed at which time the fuse in the new belt will be blown to start a new count from 0. Now you can replace the fuse in the old one if you know how.

no such code for a bizhub 350 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Clean the registration sensor under the transfer belt or have them replaced also might need to replace the transfer belt Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

is this a scan to email issue. normally is port 25 depending on the system being used Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

sure its the right code could not find in the service manual for bizhub 350 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

restart the machine.If error code appears call your tech services rep.

in the userscreen Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

why do you want to reset Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

sir/mam Fuser is low temp. reset in service mode, if code comes back do not reset as this deals with fuser the hot part can catch on fire Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

are these third party?????? if so get OEM cartridge the chip may be bad, mite try cleaning chip contacts with ispololy alcchol Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what is the model number and any additional info Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f