20 Most Recent Vizio L32 32 in. LCD HDTV - Page 2 Questions & Answers

Hi , Get a technician check the ports on the video card if there are dry joints if ok change the video/audio card . peace .

English!!

Did you test the remote with your cell phone camera?

this might help, posted 8 years ago. http://www.fixya.com/support/t13824541-orange_vizio_light_comes_but_tv_wont. if you want to fix the power board yourself i'd try Aliexpress for the parts IC901= Off-Line SMPS Current Mode Controller (ICE3B1565), you might also consider the surrounding/connecting parts to that chip as being damaged... particularly the Zener diode.

Yes there is a fuse, but it is integrated, i.e. a soldered component in the main board. A manufacturers warranty fix would be your best bet or failing that a manufacturers recommended engineer. Please don't use an unqualified person as the main board can be blown if too much heat is applied when changing out the component part.

My 47" Vizio wouldnt turn on this morning.....had a similair problem 3 yrs ago.....this is what i did and fixed the problem myself.....apparently you have to reset TV. Here is what has worked for me. So unplug tv power cord from the tv. Hold the power button and imput button together ( located on side panel ) for approx 45 sec......plug cord back into tv. Press power button on tv and voila !!!!! Tv came back on!!! I have had my Vizio almost 5 yrs. But have to call the unhelpful customer service atleast once a year.... I hope this works for you :)

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size

In most of the case, the problem is a defective display LCD panel, this problem in some terminology is called PIXEL RETAINING, it means the pixels are locked up, there is no good permanent solutions for it, you have to change the LCD panel.

there a problem on power side.. chage the ic and the resistor going to ic and check also the signal diode.

sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!