20 Most Recent Hotpoint Aquarius WF000 Front Load Washer - Page 2 Questions & Answers

0helpful
1answer

Not filling and door lock lit is not on

Do You Have an ERROR code on the Front Loader??. look up part # 34001265 on eBay or a Door Switch.
5/28/2014 6:51:24 AM • Hotpoint... • Answered on May 28, 2014
0helpful
2answers

Hotpoint aquarius wf101 washing machine wont start

fit new door interlock switch not too expesive parts about £15
5/27/2014 8:07:01 PM • Hotpoint... • Answered on May 27, 2014
0helpful
2answers

Leak from front

You take off the top to get into the machine, there are usually screws at rear top holding top panel on. That said the most likely culprit is the pump which you get to from underneath, followed by the door seal, which you should inspect carefully for very small holes. My guess is the pump, have you checked the filter is clear?
5/16/2014 9:12:24 PM • Hotpoint... • Answered on May 16, 2014
0answers
0helpful
1answer

Maytag Washer Not Completely Rinsing

If your washer has an extra rinse button try pushing it. My Maytag refuses to wash unless that button is pushed, so in your case it may not be completing the rinse cycle correctly.

Just a suggestion.
4/16/2014 4:10:25 PM • Hotpoint... • Answered on Apr 16, 2014
0helpful
3answers

Hotpoint wf740 aquarius 1400 v noisy banging during spin = dust

It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber.
To check the springs, remove the top cover, and you will see the springs.
Another possibility is the concrete weight could be broken or loose.
You need to remove the lower rear panel of washer to check the shockers and concrete weight.
Please rate my solution.
Thankyou.
4/3/2014 11:44:35 AM • Hotpoint... • Answered on Apr 03, 2014
0helpful
1answer

Water not pumping out of machine-zanusi aquarius wf000

1. Check that the water tube is properly fixed 2. The tap is on 3. The program is on If you hear a humm sound without water means that the valve is open but is closed before that. If no humm is heard then the valve could be broken.
4/3/2014 7:18:47 AM • Hotpoint... • Answered on Apr 03, 2014
0helpful
1answer

Hotpoint Aquarius WF000 - water problems.

have u tryed to clean the fillter at the back of he machine
4/2/2014 9:38:27 PM • Hotpoint... • Answered on Apr 02, 2014
0helpful
3answers

How do you change brushes on a hotpoint aquarius

I have a Hotpoint Aquarius WF740. This does have brushes. Tilt the washing machine backwards & look underneath. The brushes can be seen on the motor housing, they are secured by two screws each.
3/31/2014 2:38:26 PM • Hotpoint... • Answered on Mar 31, 2014
0helpful
3answers

Aquarius wf541. Am trying to unscrew and remove

There must be something stuck in the filter, as normally it should pull straight out once you have unscrewed it.
Try screwing and unscrewing it at the same time keep twisting and pulling at the filter.
If you can't tremove it, then you sre going to have to remove the complete pump in order to clear the obstruction
Hope this helps you ..
3/22/2014 8:46:57 PM • Hotpoint... • Answered on Mar 22, 2014
0answers
0answers
0helpful
1answer

Wf541 problems

if you mean the mains switch power this is available to buy on its own fairly easy to do,only four wires are connected to it.
11/7/2013 8:29:00 AM • Hotpoint... • Answered on Nov 07, 2013
Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

705 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Washing Machines

  • Hotpoint Washing Machines

Most Popular Question

hotpoint aquarius wf 250 off lights

  • Washing Machines
Loading...