20 Most Recent
HP PSC 2410 All-In-One InkJet Printer - Page 8 Questions & Answers
Is there an internal fuse in my HP 2410 Photosmart
No , there is no fuse in it. These voltages are just the main ones, from the power pack, have you checked the presence of the 5 volts one for the processor? The voltage is obtained from the 16 volts one by using a regulator - it looks like a big,flat transistor. If the voltage is there then the processor has failed and in this case the printer is dead - replacing the mainboard would cost you more than a new one.
I have changed my laptop from XP to windows 7 I
If you are using a genuine copy of Windows 7 , then Just click the Windows update Option after connecting to internet ...
Please Rate my answer Fairly and Support me . Thanks and Regards Deepak Richard
The on light is flashing and hour glass is showing
HP PSC 2410 PHOTOSMART ALL IN ONE PRINTER PROBLEMS
FOR EVERYONE OUT THERE WHO IS AT YOUR WITS ENDS WITH YOUR HP PRINTER THAT IS TOTALLY ABSOLUTELY STUCK IN STARTUP
AND MAKING THAT AWFUL CLICKING NOISE ---- LET ME TELL YA ---I TRIED EVERYTHING--I MEAN EVERYTHING
I WAS JUST ABOUT TO PULL ALL MY HAIR OUT--- I READ ALL THE POSTS AND DID EVERYTHING RECOMMENDED
FROM POSTS OF OTHER USERS AS WELL AS THE SORRY HP WEBSITE!
I DID NOT WANT TO TAKE APART AND CLEAN GLASS AND STRIPE B/C I WAS AFRAID TO DO THIS, BUT I THOUGHT I AM GOING
TO THROW IT AWAY TODAY ANYWAY AFTER WHAT I HAVE BEEN THRU SO I STARTED TEARING INTO IT AND -- EVENTHOUGH I AM NOW
IN TEARS B/C IT REALLY WORKED---LOL I DIDNT REALLY KNOW WHAT I WAS DOING SO LET ME TELL YOU HOW TO DO IT NOW THAT
I KNOW --LOL LIFT THE LID FOR YOUR SCANNER AND THERE WILL BE TWO SCEWS ON THE LEFT. I USED A TINY ALAN WRENCH
(WORKED GREAT) TAKE THEM OUT AND THEN OVER ON THE PANEL SIDE, TAKE A SCREWDRIVER AND LIFT FROM THE BACK-JUST POP IT OFF.
I DID NOT TAKE ANY OF THE RIBBONS LOOSE. 2 SCEWS WILL BE UNDER THE COVER, REMOVE THEM, ALSO REMOVE THE SCANNER LID BY PULLING
TAB TOWARDS YOU ARE LIFT THE LID STAIGHT UP. I JUST LET EVERYTHING HANG AGAISNT THE WALL WHILE I WAS WORKING. I TOOK THE GLASS
OUT AND USED MY SPECIAL LIL CLOTH THAT CAME WITH MY FLAT SCEEN TV AND CLEANED THE GLASS REALLY WELL, PAYING VERY CLOSE ATTENTION
TO THE BLACK/WHITE AND MIRRORED STRIP. (MAKE SURE THE BLACK/WHITE STRIP IS DOWN PUT IT ALL BACK TOGETHER ) I DIDNT EXPECT IT TO WORK
BUT IT DID!!!!!!!!!!!!!!!!!! I KNOW THIS IS LONG BUT GOSH I HOPE IT HELPS EVERYONE!! TAKE CARE ALL, KATHY
When I turn on my
you might have to unstall then reinstall it
control panel add and remove programs select the printer to uninstall or the printer might have its own uninstaller click start all programs navigate to the printer and see if it has its own uninstaller
or you might have to install drivers
control panel admistrive tools,computer management,device manager scroll down you could see a yellow question mark? right click to reinstall drivers or ports(com&lpt)+ to expand then you will see communications port or ECP printer port right click update driver
hope this helps
How do I scan with the HP PSC 2410
go here and select your operating system (Windows version) and then you can download all the drivers and software you need to scan and print
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=uk&product=303753&lang=en&
Screen on hp psc 2410 shows picture of hour glass
I too have this problem and I have found how to
correct it. It worked for me and hopfully it will work for you and
others. Turn off your printer. Open the scanner cover. Turn your
computer back on. That is what I did and it fixed it for me for now.
Please send me an E-Mail if it fixed it for you. I have a sneaky
suspecion that it just started working again and me opening the scanner
cover was not the fix. Thanks, Wayne
Not finding what you are looking for?