20 Most Recent Indesit WA 115 Front Load Washer Questions & Answers

Disconnect machine from mains power. Take off lid and reach down, see if you can release the door from there. What model is your machine?

Check the timer

Actually, while the settings dial spins, there is also a kind of grinding/clicking sound from down where the drain port is. I checked it and there is no filter there when I open it.

Control module probably faulty, this could have failed due to motor problem check for worn carbon brushes in motor.

IF YOU ARE SURE THE WATER SUPPLY IS ON. SHUT OFF WATER TO MACHINE AND REMOVE HOSES ON BACK OF MACHINE AND CK SCREEN ON VALVE THEY CAN BECOME PLUGED AND WILL BLOCK WATER FLOW. PUT THE HOSES IN A BUCKET AND TURN ON JUST TO BE SURE IT IS NOT ANOTHER PLUMBING PROBLEM.

Press "end of cycle" for 3 seconds, & tell me what happened.

You will rate me also.

There is a drain plug and filter under the drum. You access it from the front by taking the panel under the door off. Get ready for lots of water to come out when you take the drain plug off. Clean out the area of the filter and drain plug.

http://www.youtube.com/watch?v=-lnfePzPwTQ

• Indesit
• WA 115 Front Load Washer

This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question

• Indesit
• WA 115 Front Load Washer

This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question.