20 Most Recent E-Machines eMachines Desktop PC - Page 4 Questions & Answers

0helpful
1answer

Power cord on motherboard

Hello, The power to your motherboard is coming from your power supply if it is bad you will have to get another emachine power supply, for emachines, only emachine parts work.
11/3/2015 3:38:16 AM • E-Machines... • Answered on Nov 03, 2015
0helpful
1answer

E machine does not boot just loads the e machine icon

Hello, Sounds like your software maybe messed up or your hard drive is bad. Try repairing your software or reloading your cd's or you will have to get new hard drive and reload the software.
11/3/2015 3:34:44 AM • E-Machines... • Answered on Nov 03, 2015
0helpful
1answer

Someone gave me a emachinine tower model t1742 no cords

I have purchased many different computer cords from stores, flea markets, and yard sales. Sometimes, you can find a small computer repair shop in your local area that will help you with the cords you might need and if you are really lucky, they might give you one or at least have a used cord to sell you. I know power cables can run 10 to 25 dollars retail, but I have purchased them for a little as a dollar from yard sales.
8/12/2015 12:28:10 PM • E-Machines... • Answered on Aug 12, 2015
0helpful
1answer

Will not reboot

7/21/2015 6:44:09 AM • E-Machines... • Answered on Jul 21, 2015
0helpful
1answer

Emachine t3414 restore to factory setting

Restart your computer now as soon as you hit the power button keep on holding Alt key & keep on tapping F10 key Alt+F10 it will open the recovery console select full factory restore and follow on screen instruction

(Note:this will erase all datas on the computer)

or you might tryDuring the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

hope this helps you

7/17/2015 1:19:21 AM • E-Machines... • Answered on Jul 17, 2015
0helpful
1answer

How do I lock emachine mousepad?

7/11/2015 12:33:19 AM • E-Machines... • Answered on Jul 11, 2015
0helpful
1answer

WHAT IS THE P7 IN MY PC FOR

Anything labeled with a "P", such as your P7, is a power connector from your power supply. Most, if not all, computer power supplies have extra connectors so that you can install extra components, like a second DVD drive or second hard drive, if you have room in your case.
7/3/2015 3:31:02 AM • E-Machines... • Answered on Jul 03, 2015
0helpful
2answers

How to replace the hard drive on an emachines model EL 1352 G

Take off the side panel, then remove the front panel by leveraging the black plastic clips that hold it to the metal chassis. Under the front panel will be the screws holding the dvd drive caddy in place which when removed reveals the hard drive.
7/3/2015 3:22:52 AM • E-Machines... • Answered on Jul 03, 2015
0helpful
1answer

Wont boot up properly looking to reformat

Check and see if there's a Disk in your CD/DVD ROM Drive. I assume there's on in there that has some bootable files and your computer see's it and is asking to boot from it. Usually it will say something like "Press any key to boot from CD" so if you don't want boot from that CD just don't press any keys.
7/1/2015 1:26:21 AM • E-Machines... • Answered on Jul 01, 2015
0helpful
2answers

I restore my t3418 pc, lost internet

make sure you install all the network drivers (wired, wireless) then set up your home network to talk to your router(if you have one)
6/30/2015 11:01:26 AM • E-Machines... • Answered on Jun 30, 2015
0helpful
1answer

When i on it the system freeze up with lines goes up and down on it and cant do anything with it then you try get back on it it wouldnt start up right ontil you have too keep playing with it what do t

If you have another monitor change it see if that helps, If it doesn't tale the monitor to a service center (Best Buy) and the will test it for you. Terry
6/22/2015 8:51:42 AM • E-Machines... • Answered on Jun 22, 2015
0helpful
4answers

Unlock codes for FATE on my PC?

www.gamefaqs.com.Go here any available unlock/cheat codes can be found here.glad to be of help.RICHARDM69
6/22/2015 8:47:13 AM • E-Machines... • Answered on Jun 22, 2015
0helpful
1answer

Change password

there are many different passwords you can have on a pc, bios, windows and others. if it's bios, contact emachines and the might be able to help. if not, get the hirens boot disc and there's a password remover on that - if you can follow it. Hiren BootCD 15 2
6/2/2015 9:48:06 PM • E-Machines... • Answered on Jun 02, 2015
0helpful
1answer

My start button wont work on my E 4028

you have a power supply or motherboard failure
6/2/2015 9:24:33 PM • E-Machines... • Answered on Jun 02, 2015
0helpful
1answer

How do I copy & paste from my e-machine?

Key in Ctrl-C to copy Key in Ctrl-V to paste Also, you can key in Ctrl-X to cut then the Ctrl-V to paste
6/2/2015 9:10:20 PM • E-Machines... • Answered on Jun 02, 2015
0helpful
1answer

How 2 remove harddrive

open the cabinet, remove the cables, then the screws holding the drive in and it slodes out.
6/2/2015 9:08:12 PM • E-Machines... • Answered on Jun 02, 2015
0helpful
1answer

How do I deep my shockwave from crashing ?

Hardware or Software?
6/1/2015 3:34:59 PM • E-Machines... • Answered on Jun 01, 2015
0helpful
1answer

I have to sing on as adminstrator to add a printer. How to do this?

How many accounts are there on your computer, if there is only you then you should already have administrator privileges and should be able to install a printer. It may be that you do not have these privileges despite being the only account holder. If this is the case go to control panel. Go to users and accounts. Entering that screen you should boxes that control the attributes connected with an account. You should be able to ascribe administrator status to your account here. Good Luck This should work but if it doesn't add the detail of the attempt and resubmit the query Good Luck
6/1/2015 12:41:58 AM • E-Machines... • Answered on Jun 01, 2015
0helpful
5answers

My computer won't recognize USB hard drive, or boot while it is connected, any ideas?

the next time you get it up and running try doing a disk cleanup and a defrag and also do a disck check on the drive.go into mycomputer..then right click on the drive you want todo a disk check.might work after the check..
5/13/2015 7:34:05 AM • E-Machines... • Answered on May 13, 2015
0helpful
1answer
Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

5,283 questions posted

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Andrew Chrostek
Andrew Chrostek

Level 1 Expert

187 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

E-Machines Computers & Internet

  • E-Machines Computers & Internet

Most Popular Question

turn emachine et1810 01 pc smell

  • Computers & Internet
Loading...