20 Most Recent Samsung DLP HL-P5663W 56" TV - Page 9 Questions & Answers

Lamp should be replaced. It is damaged.

Check and replace all the electrolytic capacitors at the audio output section circuit.

DLP chip damage. Check this site for more details. http://electronicshelponline.blogspot.com/ Pull up previous posts or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

The details to these has in its user manual. Refer it please.

Check its main board for fault.

Check its bulb and lamp inverter board.

Your description about the fault is not clear to understand. If you wish to get more details, check the site linked here. It has screen shots to faulty plasma TV. You can compare them, and can understand the faulty stage. http://electronicshelponline.blogspot.com/ Pull up previous posts, either by type in the Brand name to your set in its search box, or view it in Mosaic / Timeslide / Flipcard option. Select view option by the drop-down view box, at the top left or the display window.

It sounds that the main power regulator board to your TV has damaged. Contact any service technician.

There are only 2 moving parts on a dlp tv the color wheel and the fan. The color wheel needs to be replaced about every 4 to 5 years. Some start to make noise and others like mine blow up with a bang. Go to utube to get instructions on how to replace it only cost me for part $100 good luck

Hi

The first problem was always standby mode.... get back the original eprom IC 24CO8WP in to the PCB, then find the original remote control of you TCL Tv tcl-14175 then you power On In the Remote control while your TV is in Standby mode! then you see your tv is going ON... Because your unit is in Child lock Mode....

thanks!

The "popping" sound could be electricity jumping from one place to another.An internal SHORT in a transistor, an internal OPEN in a resistor.Intermittent [sometimes it does,sometimes it dose not] arcing electronic parts.
Dust [metal filings,very fine hair that burns like a fuse] & dirt [anything metal], arcing (shorted) capacitors.Bad connections on ANY ground connector.
Possible:: your surround sound MASKED the popping sounds by acting like a FILTER.Which lets me to think that your problem is in the audio section.

The audio output section circuit must be troubleshooted. This is a skilled work.

My Samsung was fixed for "free." Call Samsung service 800 number. When asked why you are calling tell them it is about the white dots problem. The tech said he would help me solve the issue and provide me with repair order from a local Electronics dealer. I was given a work order number by the tech and did receive a call from the local repair organization. My DLP is over 36 months old so I asked if this was a "no charge" fix. He assured me that it is. Low and behold I am 100% satisfied with Samsung and the standing behind the product. The fix is a chip replacement that Samsung is well aware of.

Tom from Syracuse, NY

go to setting then find the timer,then turn it off the timer

Its memory IC is gone needs to replace check model spec or IC log book for yours model or email brand services to get IC number i.e. 8 pin ic any one with soldering knowledge can do that

Your TV has an SD/ED component input and an HD component input. You are using the HD input. It can only accept HD signals. You need to correct the settings in you cable box. You need to "fix" the video output so that it converts everything to HD. If you have a motorola box, you can usually turn the box off and press the menu button to access the cable box setup menu. Set the 4:3 override to Stretch or Full. If you need more help with this, post back with more information: cable provider, cable box used. I hope this was of some assistance.