20 Most Recent Samsung DLP HL-P5663W 56" TV - Page 5 Questions & Answers

On your remote u have to change from t.v. to auxiliary or where ever u have DVD connected to and play.

This TV is horrible. I have the same one and not even a year replaced the light bulb twice. Very disappointing for a Samsung.

go to the menu on your smart tv and reset your tv. also update your software thru the menu. if you are not sure how to do this check your user manual. also buy a wireless usb keyboard to make getting around the menu rather than the remote control. make sure that the wireless keyboard has a touch pad too.

check resolution setting and try usimg other other knpwn good cable

GO THRU THE MENU AND FIND THE SOUND SETTING. SET FOR TV STAND IF IT IS A LG SMART TV. GOOD LUCK.

THE ON SCREEN MENU IS FOR WHEN YOU WANT TO CONFIGURE OR CHANGE A SETTING ON THE TV LIKE FOR EXAMPLE TO SEARCH FOR YOUR CHANNELS OR TO CONFIGURE THE SOUND OR TO GET ON THE INTERNET, ETC.....

The menu button normally is normally between the volume contol and the channel control. It could also be called Setup. Good Luck.

reset the Tv settings, under the menu, and try again. Good Luck.

refer to the owners manual. Under network settings, disable sharing. Good Luck.

When this happens it would be cheaper for you to toss it away and get a new tv. TV's are very cheap right now compare to repairing them. When you do shop around try and get a Smart TV. Good luck.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Disassemble procedure to many popular brand TVs and other devices are given in detail with illustrations.

Light engine fault. Contact any service technician. http://electronicshelponline.blogspot.com/

i dont know, but their is a "format" or procedure for doing this...press this button one time, and then do this, etc..be forewarned it will wipe out all of your recordings and scheduled recordings...you mite try contacing the customer service website at Samsung on the web! : ) Give them you tv model number, etc..

there is a scanner feature on the remote...make sure you have good antenna connection hooked up and run that scan feature...

Check the bulb and ballast board. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

The main switch system has gone faulty, it is safe to pull the mains plug out the socket to switch on and off TV.

To fix fan error change the fan to start with. In the computer if the error persists then it's a fault on the mother board.

I would not know the error with your TV without having the service manual to look it up. More often the power supply section gives problems in these sets. Sometimes the fault can be in another board. Board substitution is the best way to find the defective board.

Bypassing the temp sensor may cause a FIRE!!! I don't recommend this.